Step 3: Performing The Easy Setup - Sony BDV-Z7 Operating Instructions Manual

Step 3: Performing the
Easy Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
1 2
4 5
7 8
0
C/X/x/c,
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
If the Easy Setup Display does not
appear
Recall the Easy Setup Display. See "To
recall the Easy Setup Display" (page 31).
4
Press X/x to select a language for the
OSD.
"/1
3
6
9
HOME
5
or c.
Press
The setting message appears.
This message appears only when
performing the [Easy Setup] for the first
time. It does not appear when performing
the [Easy Setup] accessed via the [Setup]
setting.
6
Press or c.
The Setup Display for video cable selection
appears.
Easy Setup
- TV Connection Method
Select the video cable connecting this unit and the TV.
Component Video
Video
7
Press X/x to select the cable used to
connect the system and TV.
Check the connection of the system and TV
(page 20).
• When you connect the system and TV
with an HDMI cable, select [HDMI], go
to Step 8 and set the video output
resolution to match your TV.
• When you connect the system and TV
with a component video cord, select
[Component Video], go to Step 8 and set
the video output resolution to match your
TV.
• When you connect the system and TV
with the video cord, select [Video] and go
to Step 9.
Note
• When you do not connect the system and TV
with an HDMI cable, you cannot select [HDMI].
• When connecting the HDMI OUT jack and
other video output jacks at the same time, select
[Component Video].
29
GB