Table of Contents
Advertisement
Available languages
Available languages
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the ca
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the
natural fitting of the gasket or accelerate
this process by heating up the part
involved with a normal hair drier.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The
After Sales Service specialist will carry
out the reversibility of the doors at your
cost.
Electrical connection
This refrigerator is designed to
operate on a 230 V AC ( ~ ) 50 Hz
supply.
The plug must be put into a socket
with protective contact. If there is no
such, it is recommended to get an
electrician to fit an earthed socket in
compliance with standards near the
refrigerator.
This appliance complies with the
following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage
Directive)
modifications,
89/336 EEC
(Electromagnetic
Directive)
modifications.
96/57 EEC - 96/09/03 (Energy
Efficiency
subsequent amendments
electrolux 53
GB
and
subsequent
of
03.05.89
Compatibility
and
subsequent
Directive)
and
its
Advertisement
Chapters
Table of Contents
