Advertisement
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3DLR56XX Series Fan
ETL Model NO. : 3DLR56(X)
RETAILER NAME:
RETAILER ADDRESS:
5.3 kgs
11.7 lbs
Total fan weight
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 3DLR56 Series
Summary of Contents for Monte Carlo Fan Company 3DLR56 Series
- Page 1 Owner’s Guide and Installation Manual 3DLR56XX Series Fan ETL Model NO. : 3DLR56(X) Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 5.3 kgs 11.7 lbs Total fan weight...
-
Page 2: Cautions And Warnings
Note: Suitable for use in wet locations when installed in a GFCI protected branch circuit. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2017 Monte Carlo Fan Company 09/2017... - Page 3 Warning: Cross pin and keeper pin must be cross pin and pull the screwdriver in the installed securely, failure to install them will meantime as shown in the inset. result in serious injury. © 2017 Monte Carlo Fan Company 09/2017...
- Page 4 The splices after Safety Cable in the U.S., Do Not Remove being made should be turned upward and pushed carefully up into the outlet box. Knockouts In The Outlet Box. © 2017 Monte Carlo Fan Company 09/2017...
- Page 5 Use the provided L-shape screwdriver to install blade bracket with blade and medallion by blade screws provided. Tighten screws securely. Repeat this process for remaining blades. © 2017 Monte Carlo Fan Company 09/2017...
-
Page 6: Remote Control Setting And Operation
Or you may turn power off for 15 seconds then turn power back, and then turn the fan on, Over load protection (current limit)- The device will limits the maximum current output from the receiver/drive when the fan or light load was increased abnormally. © 2017 Monte Carlo Fan Company 09/2017... - Page 7 4. When fan is turned on or operated forward/reverse function, it shutters & goes back & forth until it turns. It is a normal performance of this fan and it will take for few seconds to run this operation. © 2017 Monte Carlo Fan Company 09/2017...
-
Page 8: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2017 Monte Carlo Fan Company 09/2017... - Page 9 Sep.2017 Jan.2018 update ETL listed model number and file number...
Need help?
Do you have a question about the 3DLR56 Series and is the answer not in the manual?
Questions and answers