Figure 15. Circuit Id, Time/Date Screen; Figure 16. Terminal Modes Menu Screen - ADTRAN T200 H2TU-R Installation And Maintenance Manual

Figure 15 illustrates the Circuit ID, Time/Date
Screen. The circuit ID can be any alphanumeric
string up to 25 characters in length. The time should
be entered using military time (for example, enter
3:15 p.m. as "151500"). The date should be entered
as MMDDYY (for example, enter January 31, 2000,
as "013100").
This unit includes two terminal emulation modes.
The desired terminal mode can be selected from the
CIRCUIT ID:
New Circuit ID =
CIRCUIT ID:
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* "3 SPACES TO UPDATE" appears at the top of each screen,
reminding you to press the spacebar 3 times to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing.
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
12
Press ESC to return to previous menu
New Date = / / (MM/DD/YY)
New Time = : : (HH:MM:SS)
Press TAB to skip to next entry field.
Press ENTER to set new Circuit ID.

Figure 15. Circuit ID, Time/Date Screen

Press ESC to return to previous menu
TERMINAL MODES MENU
Press CTRL+T to toggle update modes on any screen.

Figure 16. Terminal Modes Menu Screen

61222024L6-5, Issue 1
Terminal Modes Screen, illustrated in Figure 16.
Additionally, pressing "CTRL" and "T" while on any
screen can toggle the two terminal modes.
The default terminal emulation mode is the Real Time
Update Mode (VT100). This mode provides real time
updating of HDSL2 circuit conditions and
provisioning options as changes occur. While in Real
Time Update mode, the unit is anticipating baud poll
responses from the terminal.
01/01/00 03:39:40
01/01/00 00:40:53
61222024L6-5A