Panasonic PT-RS20K Operating Instructions Manual page 129
Hide thumbs
Also See for PT-RS20K:
- Operating instructions manual (253 pages) ,
- Command list (26 pages) ,
- Operating instructions manual (262 pages)
Table of Contents
Advertisement
Setting [SYSTEM SELECTOR] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, proceed to Step 5).
4)
Press as to select [SDI1] or [SDI2], and press the <ENTER> button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5)
Press as to select [SYSTEM SELECTOR].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[RGB]
[YP
P
4:4:4]
B
R
[YP
P
4:2:2]
B
R
[XYZ]
Setting [BIT DEPTH] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, proceed to Step 5).
4)
Press as to select [SDI1] or [SDI2], and press the <ENTER> button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5)
Press as to select [BIT DEPTH].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL] in [SDI IN]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, proceed to Step 5).
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [RGB], [YP
[RGB], [YP
P
4:4:4], [YP
P
B
R
B
R
attached to the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
Fixes to [RGB].
Fixes to [YP
P
4:4:4].
B
R
Fixes to [YP
P
4:2:2].
B
R
Fixes to [XYZ].
Automatically select [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
P
4:4:4], [YP
P
4:2:2], or [XYZ].
B
R
B
R
4:2:2], or [XYZ] is automatically selected by reading the payload ID
ENGLISH - 129
Advertisement
Table of Contents
