VM-1020 Transceiver Settings and Controls
Press and hold the power button [
settings. Any changes to the settings will be saved after eight seconds of inactivity. Pressing the Info [
Mode [
] buttons at the same time will reset all setting and parameter changes.
Group Mode
Group mode allows you to use automatic TTL settings
or have manual control over groups A/B/C. Set flash
power, focal distance, or overall group compensation.
There are three flash modes per group: TTL, M, or
Off. TTL uses automatic settings from the camera
with user control over flash compensation. Manual
allows you to set the flash power of the group. Off will
disable a group.
|
22
VM-1020 Transceiver Settings and Controls
] until the Flash Test button lights up, and the LCD displays the flash
Group Mode
GROUP
MASTER CH01
Flash Groups Flash Modes
+0.1
A
M
1/128
+0.3
B
TTL
+0.3
C
TTL
9999
Flash Adjustments
] and
Zoom
Auto
Auto
Auto