Table of Contents
Advertisement
VM-1010 Flash Settings and Controls
TTL/Macro Mode
Press and hold the power button [
] to turn the flash on. LED indicators will light up for TTL/Macro mode,
Group A, and Channel 1.
To cycle through groups A, B, and C, press Group [
]. To cycle through channels 1, 2, 3, and 4, press Channel
[
].
Note: When using the flashes with the transceiver, you must make sure to set them all to the same channel
and group.
|
20
VM-1010 Flash Settings and Controls
Advertisement
Table of Contents
