Ricoh Aficio MP1812L Operating Instructions Manual page 68

Troubleshooting When Using the Scanner Function
Message
No valid dest.
lists. Check the
settings or the
server status.
Sending has
failed. Press
Job Information
key to check the
status.
Out of paper.
Set paper on the
tray.
5
Check the reso-
lution and reset
nnn original(s)
(A figure is placed at
nnn.)
Exceeded max.
data capacity
Check resolu-
tion and Start.
Exceeded max.
page capacity.
Do you want to
send the scanned
data?
62
Cause
The authentic settings for the de-
livery server are incorrect.
Sending has failed. Press the {Job
Information} key to check the status.
No paper is loaded in the speci-
fied paper tray.
The scanned original exceeded
maximum data capacity.
The scanned data exceeded maxi-
mum data capacity.
The number of scanned pages ex-
ceeded maximum page capacity.
Solution
Check that the delivery server is
on and the authentic settings for
the delivery server are correct.
Try the operation once more.
If the message is still shown, the
network may be crowded. Con-
tact your network administrator.
Use the Job Information screen to
check for the file where the prob-
lem occurred. See "Confirmation
Displays", Scanner Reference.
Load paper of a size that is listed
in the message.
Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See "Rela-
tionship between Resolution and
Scan Size", Scanner Reference.
Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See "Rela-
tionship between Resolution and
Scan Size", Scanner Reference.
Select whether to send the data so
far.