Ricoh Aficio MP1812L Operating Instructions Manual page 66

Troubleshooting When Using the Scanner Function
Message
Connection has
failed. Check
settings and
check Scanned
File Status.
Dest. authenti-
cation failed.
Check settings
and check
Scanned File
Status.
5
Sender's name is
not selected.
Specify send-
er's name.
Cannot enter
manually more
than nnn desti-
nations.
(A figure is placed at
n.)
Cannot specify
more than 100
destinations.
The number of
destination
folders se-
lectable in one
time is limited
to 32.
Exceeded max. E-
mail size. Send-
ing E-mail has
been cancelled.
60
Cause
The correct network settings are
not made.
The entered user name or pass-
word was invalid.
The sender's name was not specified. A sender's name should be speci-
The e-mail has too many (nnn or
more) destinations.
The e-mail has too many (100 or
more) destinations.
The maximum number of desti-
nation folders that can be selected
at one time has been exceeded.
The maximum e-mail size has
been exceeded.
Solution
• Check the network settings of
the client computer.
• Check that components such
as the LAN cable are connect-
ed properly.
• Check that the server settings
are correct and the server is
working properly.
• Check that the user name and
password are correct.
• Check that the ID and pass-
word for the destination fold-
er are correct.
• A password of 128 or more
characters may not be recog-
nized.
fied before sending e-mail. Send
e-mail after specifying the send-
er's name.
Split the destinations into two or
more groups.
Split the destinations into two or
more groups.
Select 32 or fewer destination
folders.
• Increase the size of [Max. E-mail
Size].
• Set [Divide & Send E-mail] to [On
(per page)] or [On (per max.
size)].
See "Send Settings", General Set-
tings Guide.