Viewing Pictures From Connected Equipment - Sony Bravia KDL-40W2000 Operating Instructions Manual

Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead (page 38)
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 8)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment (page 37)
Press / repeatedly until the correct input
symbol (see below) appears on the screen.
On screen Labels of input jacks
display
AV1/2 or
AV1/2
AV3
AV4 HDMI IN 4 and HDMI IN 4
AV5 HDMI IN 5
AV6 or
AV6
PC PC
Additional operations
To Do this
Return to normal Press DIGITAL or ANALOG.
TV mode
Access the Input Press
signal index table index table. (Then, only in
(except for PC video analogue mode, press
input signal) select an input source, press
then press
1/2 or
1/2
3 (Y, P /C , P /C ) and
B B R R
3 (L, R)
(L, R)
6 or 6, and
6 (L (MONO), R)
and PC
to access the Input signal
g
.) To
F f
/ ,
.
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment other
than PC.
Options Description
Close Closes the Tools menu.
Power Saving See page 29.
Picture Mode See page 23.
Sound Mode See page 25.
Auto Clock Set (in Allows you to switch to digital
analogue mode only) mode and obtain the time.
Sleep Timer See page 28.
i Volume Adjusts the volume of the
headphones.
21
GB