Sony KDL-40W4100 Service Manual

Sony KDL-40W4100 Service Manual

Lcd digital color television
Hide thumbs Also See for KDL-40W4100:
Table of Contents

Advertisement

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KDL-40W4100
KDL-40W4100
KDL-40W4100
KDL-40W4100
KDL-46W4100
KDL-46W4100
KDL-46W4100
KDL-46W4100
KDL-46W4150
KDL-46W4150
ORIGINAL MANUAL ISSUE DATE: 4/2008
REVISION DATE
4/2008
9-883-779-01
REMOTE COMMANDER
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
RM-YD023
SUBJECT
No revisions or updates are applicable at this time.
DESTINATION
US
CANADA
MEXICO
LATIN AMERICA
US
CANADA
MEXICO
LATIN AMERICA
US
CANADA
LCD DIGITAL COLOR TELEVISION
EX1
CHASSIS

Advertisement

Table of Contents
loading

Summary of Contents for Sony KDL-40W4100

  • Page 1: Service Manual

    HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40W4100 RM-YD023 KDL-40W4100 RM-YD023 CANADA KDL-40W4100 RM-YD023 MEXICO KDL-40W4100 RM-YD023 LATIN AMERICA KDL-46W4100 RM-YD023 KDL-46W4100 RM-YD023 CANADA KDL-46W4100 RM-YD023 MEXICO KDL-46W4100 RM-YD023 LATIN AMERICA KDL-46W4150 RM-YD023...
  • Page 2 Self Diagnosis Supported model SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40W4100 RM-YD023 KDL-40W4100 RM-YD023 CANADA KDL-40W4100 RM-YD023 MEXICO KDL-40W4100 RM-YD023 LATIN AMERICA KDL-46W4100 RM-YD023 KDL-46W4100 RM-YD023 CANADA KDL-46W4100 RM-YD023 MEXICO KDL-46W4100 RM-YD023 LATIN AMERICA KDL-46W4150 RM-YD023 KDL-46W4150 RM-YD023...
  • Page 3: Table Of Contents

    BU Board Schematic Diagram (10 of 12) ......78 1-7. Structural Frames and Brackets Removal BU Board Schematic Diagram (11 of 12) ......79 (KDL-40W4100 Only) ............16 BU Board Schematic Diagram (12 of 12) ......80 1-8. Structural Frames and Brackets Removal H3E Board Schematic Diagram ...........
  • Page 4: Specifi Cations

    Computer Entertainment Inc. manufactured under license from Gemstar-TV “PLAYSTATION” is a registered trademark Guide International, Inc. and/or one of its and “PS3” is a trademark of Sony Computer affiliates. Entertainment Inc. The TV Guide On Screen system is protected Adobe is a registered trademark or a trademark...
  • Page 5 Wall-Mount Bracket LCD (Liquid Crystal Display) Panel SU-WL500 TV-Stand Display Resolution (horizontal x vertical) WS-S10LS/SU-FL300M 1,920 dots x 1,080 lines SU-FL300L (KDL-46W4100/46W4150 only) Screen Size (measured diagonally) KDL-40W4100 - 40 inches KDL-46W4100 - 46 inches KDL-46W4150 - 46 inches KDL-40W4100/46W4100/46W4150...
  • Page 6: Warnings And Cautions - English

    Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identifi...
  • Page 7: Warnings And Cautions - French

    Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony.
  • Page 8: Safety-Related Component Warning

    KDL-40W4100/46W4100/46W4150 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specifi...
  • Page 9 Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KDL-40W4100/46W4100/46W4150...
  • Page 10: Safety Check-Out

    KDL-40W4100/46W4100/46W4150 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).
  • Page 11: Self-Diagnostic Function

    KDL-40W4100/46W4100/46W4150 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 12 KDL-40W4100/46W4100/46W4150 2 times 5 times LED ON 0.3 sec. LED OFF LED OFF 0.3 sec. 3 sec. Viewing the Self Check Diagnostic List 1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other:...
  • Page 13: Section 1: Disassembly

    SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL Remove 2 screws from Terminal Position. Remove 6 screws. Rear Cover Remove 19 screws (KDL-40W4100 ONLY). Remove 21 screws (KDL-46W4100/40W4150 ONLY). 1-2. SWITCH UNIT REMOVAL Remove from bezel. Disconnect 1 connector. Switch Unit...
  • Page 14: Side Jack Bracket, Bu Shield And Bu Board Removal

    KDL-40W4100/46W4100/46W4150 1-3. SIDE JACK BRACKET, BU SHIELD AND BU BOARD REMOVAL Release hook and slide out Side Jack Bracket from BU Board. Remove 2 HEX screws. Disconnect 6 connectors. Remove 9 screws. Main Bracket Side Jack Bracket BU Board BU Shield 1-4.
  • Page 15: Stand Removal

    KDL-40W4100/46W4100/46W4150 1-5. STAND REMOVAL Remove 4 screws. Stand Assembly Under Cover 1-6. UNDER COVER AND AC INLET REMOVAL Remove 1 screw. Remove 2 screws. Remove 1 screw. Under Cover AC Bracket AC Inlet Bottom Bracket KDL-40W4100/46W4100/46W4150...
  • Page 16: Structural Frames And Brackets Removal

    KDL-40W4100/46W4100/46W4150 1-7. STRUCTURAL FRAMES AND BRACKETS REMOVAL (KDL-40W4100 ONLY) Remove 4 screws from Top Vesa Brackets. Remove 1 screw from Main Bracket and Bezel. Remove 4 screws from Main Bracket. Remove 6 screws from Spine Frames. Remove 4 screws from Bottom Vesa Brackets.
  • Page 17: (Kdl-46W4100/46W4150 Only)

    KDL-40W4100/46W4100/46W4150 1-8. STRUCTURAL FRAMES AND BRACKETS REMOVAL (KDL-46W4100/46W4150 ONLY) Remove 1 screw from Main Bracket. Remove 3 screws from Main Bracket and Spine Frame. Remove 2 screws from Top Vesa Bracket. Remove 2 screws from G Board Support. Remove 2 screws from Center Frame.
  • Page 18: Speakers, Under Bar, H3E/H4 Board And Light Guide Removal

    KDL-40W4100/46W4100/46W4150 SPEAKERS, UNDER BAR, H3E/H4 BOARD AND LIGHT GUIDE REMOVAL Slide out Speaker (L) Unit from Bezel. Slide out Speaker (R) Unit from Bezel. Remove 2 screws from Under Bar. Disconnect 1 connector and slide out H3E Board from Clear Panel.
  • Page 19: Lcd Panel Removal

    TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “LVDS Cable Routing” on Page 36 for KDL-40W4100 and Page 58 for KDL-46W4100/46W4150 and “LVDS Cable Routing Caution” on Page 37. Disconnect 2 connectors.
  • Page 20: Balancer (Mt Inverter) Board Removal

    The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure” on Page 38 for KDL-40W4100 and Page 60 for KDL-46W4100/46W4150. Remove 8 screws (KDL-40W4100 ONLY).
  • Page 21: Wire Dressing

    KDL-40W4100/46W4100/46W4150 WIRE DRESSING KDL-40W4100 ONLY H Boards/Speaker Harness Apply harness to Panel TOP edge. To center Harness, position RED UL tape over center of panel. Use screw on panel as Reference where center of panel is. Apply Sheet core C over Red UL tape once harness is centered.
  • Page 22 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY H Boards/Speaker Harness: Lighted Sony Logo Apply LCD Tape over panel sharp edge and connect harness to Lighted Sony Logo. KDL-40W4100/46W4100/46W4150...
  • Page 23 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness Apply Sheet Core C to Harness. Use BLACK UL TAPE on Harness as guide where to apply Sheet Core C. Apply LCD Tape over speaker wires. Use Black UL tape as guide where to apply tape.
  • Page 24 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness – Attach H3/H4 Connector H4-Bd Apply LCD Tape over panel sharp edge. H3E-Bd KDL-40W4100/46W4100/46W4150...
  • Page 25 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness: H3-Board routing Keep wires from Crossing over edge of Bezel (pinch point) KDL-40W4100/46W4100/46W4150...
  • Page 26 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Balancer Board Cable Routing Fix 7P harness with Sheet Core C. NOTE: Wires are routed UNDER Spine Frame to avoid sharp metal edge. CAUTION: Make sure there is sufficient Slack on wire so there is very little...
  • Page 27 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY CAUTION: Keep wires away from capacitor C6729 7P Connector Assy CAUTION on IP5-Bd. (No Touch) Use plastic Pin on Panel as guide to apply Himelon tape Sheet Core C. KDL-40W4100/46W4100/46W4150...
  • Page 28 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LEFT Speaker Harness Dressing Apply LCD tape (2 Places) to secure Left Speaker wires. Dress speaker wires in Slide Clamp as shown. No Need to apply LCD Tape over speaker. KDL-40W4100/46W4100/46W4150...
  • Page 29 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY BU Board Support Bracket Dress harness in slide clamps as shown (3 places). KDL-40W4100/46W4100/46W4150...
  • Page 30 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY CAUTION: BU Board Support Bracket Dress 30P Harness as shown to keep CAUTION JIG connectors CLEAR of obstructions. KDL-40W4100/46W4100/46W4150...
  • Page 31 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 13P Connector Assy Routing Dress 13P Conn Assy in Slide Clamps as shown (2 Places). KDL-40W4100/46W4100/46W4150...
  • Page 32 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 5P Connector Assy Routing KDL-40W4100/46W4100/46W4150...
  • Page 33 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY TCON Power Routing/Dressing Apply LCD Tape as shown to 4P TCON Power Conn Assy. Apply Sheet Core C Over sharp edge of VESA Bracket. Route wires in Slide Clamp (2Places) KDL-40W4100/46W4100/46W4150...
  • Page 34 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY SWITCH UNIT ROUTING/DRESSING KDL-40W4100/46W4100/46W4150...
  • Page 35 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY SWITCH UNIT ROUTING/DRESSING (CONTINUED) NEW WIRE UTING/DRESS DETAILS Route Switch Unit Cables UNDER 5P Conn. Assy. Use BLK UL Tape on harness as Reference to apply Tape(LCD). Total Tape(LCD) qty. change 9Æ10 Switch Unit wires CANNOT Touch 13P Power Conn Assy.
  • Page 36 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LVDS Cable Routing 40W4100 LVDS Cable has ONE WHITE UL TAPE Band CAUTION: DO NOT USE LVDS cable screw hole to the left. Attach LVDS cable to Hole ABOVE connector. Apply 3x8mm screw to secure LVDS metal...
  • Page 37 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LVDS Cable Routing CAUTION DO NOT this hole to secure LVDS cable. Location of correct screw hole to use for LVDS cable. MAIN BRACKET KDL-40W4100/46W4100/46W4150...
  • Page 38 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY INSTALLATION PROCEDURE FOR MDF-61 CONNECTOR STEP1: ALIGN CONNECTOR STEP3: PUSH DOWN ON BLACK STEP2: INSTALL CONNECTOR LOCK TAB TO SEAT CONNECTOR. WHEN CONNECTOR IS SEATED IT WILL “CLICK” INTO PLACE. “HRS” LOGO WILL BE VISIBLE WHEN STEP4: PULL LOCK BLACK LOCK CONNECTOR IS PROPERLY LOCKED.
  • Page 39 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY High Voltage MDF-61 Wire Dressing MDF- 61 (NEW) CONNECTOR 1-835-147-11; 310mm Length Installation: Align connector in header Push Black Button on top of Conn. Confirm Conn. “snaps” in firmly. Slide BLACK locking latch in direction printed on the PWB silk (circled RED in photo) Dress H.V.
  • Page 40 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY High Voltage MDF61 CAUTION Use Sheet Core C to hold H.V. wire Away from metal PWB clip. (NO TOUCH) KDL-40W4100/46W4100/46W4150...
  • Page 41 KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 2P AC Inlet LOOP AC Inlet Wires around Side Clamp KDL-40W4100/46W4100/46W4150...
  • Page 42: Kdl-46W4100/46W4150 Only

    KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/ CENTER Main Harness on panel Speaker Harness RED UL Tape is positioned under boss on panel and above slot in panel bottom. KDL-40W4100/46W4100/46W4150...
  • Page 43 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness Apply harness to Panel TOP edge. To center Harness, position RED UL tape over center of panel. Use screw on panel as Reference where center of panel is. Apply Sheet core C over Red UL tape once harness is centered. Apply Sheet Core C over Black UL Tape on Harness (guides).
  • Page 44 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness: Lighted SONY Logo Apply LCD Tape over panel sharp edge. KDL-40W4100/46W4100/46W4150...
  • Page 45 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness: Continued Apply Sheet Core C to Main Harness as shown. KDL-40W4100/46W4100/46W4150...
  • Page 46 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness Apply Sheet Core C to Harness. Use BLACK UL TAPE on Harness as guide where to apply Sheet Core C. Apply LCD Tape over Speaker. DO NOT block the hole in the speaker with the tape.
  • Page 47 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness – Attach H3/H4 Conn. Apply LCD Tape over panel sharp edge. H4-Bd KDL-40W4100/46W4100/46W4150...
  • Page 48 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness: H3-Bd routing Keep wires from Crossing over edge of Bezel (pinch point) KDL-40W4100/46W4100/46W4150...
  • Page 49 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Balancer Board Cable Routing Route wires just under Plastic peg Fix 9P harness with Sheet Core C. on panel as shown. NOTE: Make sure wires are not pulling or Wires are routed UNDER Spine Frame Causing stress on connector.
  • Page 50 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY LEFT Speaker Harness Dressing Apply LCD tape to secure Left Speaker wires. Dress speaker wires in Slide Clamp as shown. No Need to apply LCD Tape over speaker. KDL-40W4100/46W4100/46W4150...
  • Page 51 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY BU Board Support Bracket Dress harness in slide clamps as shown (4 places). KDL-40W4100/46W4100/46W4150...
  • Page 52 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY CAUTION: BU Board Support Bracket Dress 30P Harness as shown to keep CAUTION JIG connectors CLEAR of obstructions. KDL-40W4100/46W4100/46W4150...
  • Page 53 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 13P Connector Assy Routing Dress 13P Conn Assy in Slide Clamps as shown (2 Places). KDL-40W4100/46W4100/46W4150...
  • Page 54 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 5P Connector Assy Routing Dress 5P Conn Assy in Slide Clamp as shown KDL-40W4100/46W4100/46W4150...
  • Page 55 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Use Tape, LCD Route wires in 4P TCON Power Routing Slide Clamp KDL-40W4100/46W4100/46W4150...
  • Page 56 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Switch Unit Routing/Dressing Use Tape, LCD Dress Switch Unit wire together With 4P TCON Power Harness. Dress Switch Unit wire inside Slide Clamp KDL-40W4100/46W4100/46W4150...
  • Page 57 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Switch Unit Routing/Dressing: Part II Dress Switch Unit wire inside Slide Clamps (2 Places). KDL-40W4100/46W4100/46W4150...
  • Page 58 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY LVDS Cable Routing 46W4100 LVDS Cable has TWO WHITE UL TAPE Band Dress LVDS Cable in Slide Clamp Apply 3x5mm screw to secure LVDS metal tab to panel. Apply 3x8mm screw to secure LVDS metal tab to main bracket.
  • Page 59 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY High Voltage MDF61 SPACER applies to 1-802-673-11 Panel ONLY (STOP USING SPACER when suffix change to -12) KDL-40W4100/46W4100/46W4150...
  • Page 60 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY INSTALLATION PROCEDURE FOR MDF-61 CONNECTOR STEP1: ALIGN CONNECTOR STEP3: PUSH DOWN ON BLACK STEP2: INSTALL CONNECTOR LOCK TAB TO SEAT CONNECTOR. WHEN CONNECTOR IS SEATED IT WILL “CLICK” INTO PLACE. “HRS” LOGO WILL BE VISIBLE WHEN STEP4: PULL LOCK BLACK LOCK CONNECTOR IS PROPERLY LOCKED.
  • Page 61 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Balancer Board HIGH VOLTAGE Wire Dressing MDF- 61 (NEW) CONNECTOR 1-835-148-11; 395mm Length Installation: Align connector in header Push Black Button on top of Conn. Confirm Conn. “snaps” in firmly. Slide BLACK locking latch in direction printed on the PWB silk (circled RED in photo) Dress H.V.
  • Page 62 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY High Voltage MDF61 CAUTION NO metal PWB cover on corner of PWB. Make sure cable is dressed Away from screw on corner. (NO TOUCH) KDL-40W4100/46W4100/46W4150...
  • Page 63 KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 2P AC Inlet LOOP AC Inlet Wires around Side Clamp Apply Sheet Core C over metal Sharp Edge. KDL-40W4100/46W4100/46W4150...
  • Page 64: Section 2: Service Adjustments

    KDL-40W4100/46W4100/46W4150 SECTION 2: SERVICE ADJUSTMENTS 2-1. VIEWING SERVICE ADJUSTMENT DATA The fi rst service menu (TV) displays. There are no adjustments necessary for these models. All data has TVLF CHECK SERVICE been set for optimal viewing for our customers. The following sections...
  • Page 65: Using The Remote Commander To View Service Data

    KDL-40W4100/46W4100/46W4150 2-4. USING THE REMOTE COMMANDER TO VIEW SERVICE DATA TV POWER Use the buttons on the Remote Commander to access the service menu items and adjust the data values. 1. Access Service Mode. Press the following buttons on the Remote Commander within a...
  • Page 66: Section 3: Diagrams

    KDL-40W4100/46W4100/46W4150 SECTION 3: DIAGRAMS 3-1. CIRCUIT BOARDS LOCATION SWITCH UNIT IP5Z POWER UNIT ILLUMINATION MODULE 3-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in μF unless otherwise noted. pF : μμF 50WV or All voltages are in V.
  • Page 67 KDL-40W4100/46W4100/46W4150 REFERENCE INFORMATION Terminal name of semiconductors in silk screen printed circuit ( RESISTOR CAPACITOR : RN METAL FILM : TA TANTALUM Circuit Device Printed symbol Terminal name : RC SOLID : PS STYROL Collector Transistor : FPRD NONFLAMMABLE CARBON...
  • Page 68: Block Diagram

    KDL-40W4100/46W4100/46W4150 3-3. BLOCK DIAGRAM Rear Inputs YOUT for Slicer FHD Panel with HFR Digital Video for ATSC ITU-R BT.656 LVDS x245 x245 CXD9937GB CXD9937GB CVBS for PAP ITU-R BT.1120 Video SW Video SW S + Video1 ( 18h ) CXA2241...
  • Page 69: Schematics And Supporting Information

    KDL-40W4100/46W4100/46W4150 3-4. SCHEMATICS AND SUPPORTING INFORMATION BU BOARD SCHEMATIC DIAGRAM (1 OF 12) D3.3V A_V1_IN_C,A_V1_IN_S2SW,A_V1_IN_SSW,A_V1_IN_V,A_V1_IN_Y A_V1_IN_Y — R1021 D3.3V *J1201 1/10W VD1001 RN-CP A_LINEOUT 0.5% RB1401 AMEM & XBR = 1-821-899-11 A_SPDIF_OUT SYMBOL/MACRONOTREADY A_V1_IN_C GND TERMINAL C1204 R1004 0 . 1...
  • Page 70: Bu Board Schematic Diagram (2 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (2 OF 12) — AU_13V D3.3V F2001 AUDIO_13V L2001 C2070 F2000 1.6A C2009 AWF_AMP *RB2029 C2072 0 . 0 0 1 C2128 0 . 0 1 1005 — 1005 C2003 C2004 SW_FAULT 0 . 0 1 GND_AU 0 .
  • Page 71: Bu Board Schematic Diagram (3 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (3 OF 12) — STBY3.3V_2 FL3001 << STBY3.3V >> STBY3.3V FB3001 M24256-BWMN6TP(A) IC3003 RESET R3018 EEPROM R3011 2 . 2 k 1/16W 1/16W CHIP R3010 RN-CP 0.5% C3006 1/16W 0 . 1 CHIP C3013 JL3003...
  • Page 72: Bu Board Schematic Diagram (4 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (4 OF 12) D3.3V HP_VCC_33 — VL1.0 EGPA0 AC26 WX2_RXO_N0 RXO_N0 DPA_0 TA1M FL4701 EGPA1 AC25 WX2_RXO_P0 RXO_P0 DPA_1 TA1P VDDF DVDD1 EGPA2 WX2_RXO_N1 RXO_N1 FB4703 C4741 C4748 DPA_2 C4728 D3.3V 0 . 1 0 . 0 0 1...
  • Page 73: Bu Board Schematic Diagram (5 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (5 OF 12) — DDR_1.8V WX2_DDR_1.8V FB4902 DDR2_A_DQ0 AA23 VDDM FB4900 AA24 DDR2_A_DQ1 DDR2_A0 DDR2_A_DQ0 C4901 C4928 C4929 C4930 C4931 VDDM 0 . 0 1 0 . 0 0 1 0 . 0 0 1 0 .
  • Page 74: Bu Board Schematic Diagram (6 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (6 OF 12) — HDMI5V PC-R CL5007 PC_R PC-G FB5001 HDMI3.3V CL5008 PC-B PC_G FB5002 CL5009 PC_B FB5003 R5001 R5003 R5005 PS5000 PCA9517DP 0.5A 1/10W 1/10W 1/10W IC5211 — RN-CP RN-CP RN-CP JL5014 0.5% 0.5% 0.5%...
  • Page 75: Bu Board Schematic Diagram (7 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (7 OF 12) R7082 C7066 330p 1/16W RN-CP — 0.5% R7094 1/16W CHIP R7070 R7076 R7083 R7090 REG12V 100k 1/16W 1/16W 1/16W 1/16W RN-CP RN-CP CHIP RN-CP D1.8V 0.5% 0.5% 0.5% F7003 C7070 2.2A R7080...
  • Page 76: Bu Board Schematic Diagram (8 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (8 OF 12) — D3.3V D1.2V D3.3V_IO — FL7200 VDDC VDDR3 MSCLK C7200 C7215 C7229 C7258 C7250 C7317 C7269 C7279 C7300 C7271 C7301 VDDC VDDR3 4 . 7 4 . 7 MSDATA(0) 6.3V 6.3V 6.3V 6.3V...
  • Page 77: Bu Board Schematic Diagram (9 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (9 OF 12) D1.8V JL7409 FB7401 C7406 — 0 . 1 DDR2 (x16) 1005 VDDR_MEM_1.8V IC7401 HYB18TC1G160CF-2.5 MEM_DQ0 DQA_0 MEM_DQ1 VDD1 DQA_1 — MEM_DQ2 DQA_2 MEM_DQ3 VSS1 DQA_3 MEM_A12 VSSQ1 MEM_DQ4 DQA_4 MEM_QS#1 MEM_DQ5 MEM_QS#1...
  • Page 78: Bu Board Schematic Diagram (10 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (10 OF 12) USB1.1 PORTA — C7505 100p JL7521 USB1.1_/OVRCUR 1005 USB1.1VBUS USB_OVRCURb R7505 JL7522 USB1.1N 1/16W USB1.1PA CHIP USB1.1P JL7523 USBPA USB1.1NA USB1.1GND JL7524 USBNA DVICLK D5V_USB V2_DET USB1.1PB DVIDATA(0) USBPB C7566 HPD_DET2 USB1.1NB 0 .
  • Page 79: Bu Board Schematic Diagram (11 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (11 OF 12) PLACE THIS FILTER CLOSE TO THE TUNER — C7688 C7677 1005 L7611 C7635 0 . 1 0.27uH C7680 1005 1005 1005 R7600 AK20 FAT_IFP 1/16W CHIP AK19 — FAT_IFM C7681 C7636 0 . 1 L7612 0.27uH...
  • Page 80: Bu Board Schematic Diagram (12 Of 12)

    KDL-40W4100/46W4100/46W4150 BU BOARD SCHEMATIC DIAGRAM (12 OF 12) — TXOUT_L0N TXOUT_L0P TXOUT_L1N TXOUT_L1P TXOUT_L2N TXOUT_L2P — EGPHSI TXCLK_LN EGPHSI GRAPHICS DDR->SDR LATCH TXCLK_LP EGPVSI EGPVSI D3.3V FB7850 TXOUT_L3N EGPPCI TXOUT_L3P EGPPCI C7855 TXOUT_L4N TC74VCX162374(EL,F IC7850 1608 — TXOUT_L4P 1/OE DVOCLK0 D2.5V_2...
  • Page 81 KDL-40W4100/46W4100/46W4150 [VIDEO SW & I, O, AUDIO, BE MICRO, TRIDENT WX-2, TRIDENT DDR SDRAM, HDMI, PC, POWER SUPPLY, X245 GND, PWR, XTAL, PLL, RESET, PERIPHERAL, X245 DDR2, FLASH, NVM, FLEXBUS, STRAP, X245 AUDIO IF, USB1.1, X245 FRONTEND, ADC, GPIOC, TUNER, X245 DVO OUTPUT (ITU656.GRAPHICS)]...
  • Page 82: H3E Board Schematic Diagram

    KDL-40W4100/46W4100/46W4150 H3E BOARD SCHEMATIC DIAGRAM CL307 — CL306 STBY3.3V REC/RESERVE STBY_LED TO BU BOARD CN3201 ON_TIMER PWR/RESERVE PICTURE_OFF — CL301 CL302 JL303 CL304 CL305 BL_IN VD3.3V *CN301 D308 FR1105W Q301 Q305 Q302 Q303 — UNR52A1G0LS0 UNR52A1G0LS0 UNR52A1G0LS0 UNR52A1G0LS0 IOUTGND VCC —...
  • Page 83 KDL-40W4100/46W4100/46W4150 [LED, OPTICAL SENSOR] COMPONENT SIDE (172963611) CL306 CL306 D306 D306 D307 D307 D301 D301 D303 D303 cam17 cam17 — Q306 Q306 D302 D302 CN301 CN301 D304 D304 R308 R308 CL307 CL307 1-876-416-11 [LED, OPTICAL SENSOR] CONDUCTOR SIDE — KDL-40W4100/46W4100/46W4150...
  • Page 84: H4 Board Schematic Diagram

    KDL-40W4100/46W4100/46W4150 H4 BOARD SCHEMATIC DIAGRAM — CL403 — SIRCS CL401 STBY3.3V R402 CL402 C402 1/16W 6.3V CHIP CHIP *CN401 1/16W 2012 R401 1005 — 220p C401 SIRCS — A-1494-139-A <EX1> H4 — — KDL-40W4100/46W4100/46W4150...
  • Page 85 KDL-40W4100/46W4100/46W4150 [SIRCS] COMPONENT SIDE cam15 cam15 — CL403 CL403 CN401 CN401 R452 R452 CL401 CL401 — CL402 CL402 R451 R451 R450 R450 — [SIRCS] CONDUCTOR SIDE — — — KDL-40W4100/46W4100/46W4150...
  • Page 86: Ip5Z Board Schematic Diagram (1 Of 2) (Kdl-40W4100 Only)

    KDL-40W4100/46W4100/46W4150 IP5Z BOARD SCHEMATIC DIAGRAM (1 OF 2) (KDL-40W4100 ONLY) L6552 L6551 380uH 380uH C6568 C6570 R6576 470p 470p 6 . 8 EY6558 EY6552 EY6553 EY6559 12V @6.9A R6500 L6550 EY6560 — 0 . 4 7 260uH 1/2W S3K60 EY6550...
  • Page 87: Ip5Z Board Schematic Diagram (2 Of 2) (Kdl-40W4100 Only)

    KDL-40W4100/46W4100/46W4150 IP5Z BOARD SCHEMATIC DIAGRAM (2 OF 2) (KDL-40W4100 ONLY) PFC_OUT FB6600 FB6602 0.45uH 0.45uH — PRI_GND EY6714 C6797 R6700 450V JL6724 4 . 7 1/10W EY6604 RN-CP EY6618 EY6700 JL6719 *D6604 VCC_12V EY6701 FSF03B60 EY6715 EY6619 EY6612 C6789 EY6605 EY6620 —...
  • Page 88 KDL-40W4100/46W4100/46W4150 IP5Z [POWER] COMPONENT SIDE (KDL-40W4100 ONLY) C6405 R6917 — R6920 R6919 R6918 C6789 JW45 PH6100 PH6301 PH6300 JW24 CN6705 JW46 EY6724 C6711 EY6725 C6153 L6152 JW51 — JW50 JW49 T6800 D6150 CN6700 C6152 EY6110 EY6703 EY6621 R6603 — EY6111...
  • Page 89 KDL-40W4100/46W4100/46W4150 IP5Z [POWER] CONDUCTOR SIDE (KDL-40W4100 ONLY) D I M M E R B A C K - L I G H T - O N / O F F R 6 3 3 3 I N V - E R R...
  • Page 90: Ip5Z Board Schematic Diagram (1 Of 2) (Kdl-46W4100/46W4150 Only)

    KDL-40W4100/46W4100/46W4150 IP5Z BOARD SCHEMATIC DIAGRAM (1 OF 2) (KDL-46W4100/46W4150 ONLY) L6552 380uH L6551 380uH C6568 C6570 R6576 470p 470p 6 . 8 EY6558 EY6559 EY6552 EY6553 R6500 EY6560 L6550 0 . 4 7 260uH 1/2W — S3K60 EY6563 EY6564 EY6550...
  • Page 91: Ip5Z Board Schematic Diagram (2 Of 2) (Kdl-46W4100/46W4150 Only)

    KDL-40W4100/46W4100/46W4150 IP5Z BOARD SCHEMATIC DIAGRAM (2 OF 2) (KDL-46W4100/46W4150 ONLY) PFC_OUT FB6600 FB6602 0.45uH 0.45uH PRI_GND — EY6714 C6797 R6700 450V JL6724 4 . 7 1/10W EY6604 RN-CP EY6618 EY6700 JL6719 *D6604 EY6701 VCC_12V MA2DF600001S0 EY6715 EY6612 EY6619 C6789 EY6605 EY6620 —...
  • Page 92 KDL-40W4100/46W4100/46W4150 IP5Z [POWER, INVERTER] COMPONENT SIDE (KDL-46W4100/46W4150 ONLY) C6405 R6917 — R6920 R6919 R6918 C6789 JW45 PH6100 PH6301 JW24 PH6300 CN6705 EY6724 C6711 EY6725 JW46 C6153 L6152 JW51 JW50 — JW49 T6800 CN6700 D6150 C6152 EY6110 EY6703 EY6621 R6603 —...
  • Page 93 KDL-40W4100/46W4100/46W4150 IP5Z [POWER, INVERTER] CONDUCTOR SIDE (KDL-46W4100/46W4150 ONLY) D I M M E R B A C K - L I G H T - O N / O F F R 6 3 3 3 I N V - E R R...
  • Page 94: Semiconductors

    KDL-40W4100/46W4100/46W4150 3-5. SEMICONDUCTORS – KDL-40W4100/46W4100/46W4150...
  • Page 95: Section 4: Exploded Views

    (US/CANADA MODELS ONLY) 3-290-811-01 COVER, USER (ML) 2-580-607-01 SCREW, +PSW M5X12 3-298-457-11 LABEL, TERMINAL (KDL-40W4100 ONLY) 2-580-602-01 SCREW, +PSW M4X12 (KDL-40W4100/46W4100 MEXICO/LATIN AMERICA MODELS ONLY) 3-290-831-01 COVER, USER(L) 2-580-644-01 SCREW, +KTP2 3X8 (KDL-46W4100/46W4150 ONLY) 2-580-628-01 SCREW, +BVST 3X6 3-298-663-01 LABEL, INFORMATION...
  • Page 96: Chassis

    See Appendix A: Encryption Key Components in the back of this manual. 4-2. CHASSIS (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 2-580-629-01 SCREW, +BVST 3X8 (KDL-46W4100/46W4150 ONLY)
  • Page 97: Connectors

    The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure” on Page 38 for KDL-40W4100 and Page 60 for KDL-46W4100/46W4150. (40-SPINE, MAIN BRKT)
  • Page 98: Bezel Assembly And Lcd Panel

    See Appendix A: Encryption Key Components in the back of this manual. 4-4. BEZEL ASSEMBLY AND LCD PANEL (KDL-40W4100 ONLY) (Check the Sony Electronics Service Information website for any additional service related issues for this model.)
  • Page 99: (Kdl-46W4100/46W4150 Only)

    See Appendix A: Encryption Key Components in the back of this manual. 4-5. BEZEL ASSEMBLY AND LCD PANEL (KDL-46W4100/46W4150 ONLY) (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 2-580-640-01 SCREW, +BVTP2 4X16...
  • Page 100: Screw Legend

    KDL-40W4100/46W4100/46W4150 4-6. SCREW LEGEND KDL-40W4100 DISCRIPTION LOCATION TOTAL 2-580-640-01 SCREW, +BVTP2 4X16 REAR COVER-19 UNDER BAR-2 LCD-PNL-2 BOTTOM FRAME-4 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3 TERMINAL-2 MIAN BRKT-1 LIGHT GUIDE-1 2-580-608-01 SCREW, +PSW M5X16 REAR COVER-6 STAND PLATE-4 STAND TO PNL-4...
  • Page 101: Section 5: Electrical Parts List

    1-114-353-11 CAP, CERAMIC 0.01μF X7R (1410) C1403 1-114-331-11 CERAMIC CHIP 4.7μF A-1547-089-A BU BOARD, COMPLETE C1405 1-112-777-11 CERAMIC CHIP 0.01μF (KDL-40W4100 ONLY) C1411 1-100-905-11 CERAMIC CHIP 0.001μF 10% A-1547-090-A BU BOARD, COMPLETE (KDL-46W4100/46W4150 ONLY) C1420 1-100-912-11 CERAMIC CHIP 1μF CAPACITOR...
  • Page 102 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2036 1-114-331-11 CERAMIC CHIP 4.7μF C2088 1-114-193-11 ELECT CHIP 470μF C2037 1-100-916-11 CERAMIC CHIP 0.1μF C2089 1-114-325-11 CERAMIC CHIP 0.1μF C2090 1-100-912-11 CERAMIC CHIP 1μF C2038 1-100-916-11 CERAMIC CHIP 0.1μF...
  • Page 103 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3213 1-100-905-11 CERAMIC CHIP 0.001μF 10% C4749 1-100-916-11 CERAMIC CHIP 0.1μF C3214 1-100-905-11 CERAMIC CHIP 0.001μF 10% C4750 1-100-916-11 CERAMIC CHIP 0.1μF C4751 1-100-916-11 CERAMIC CHIP 0.1μF...
  • Page 104 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C4922 1-112-777-11 CERAMIC CHIP 0.01μF C5321 1-112-777-11 CERAMIC CHIP 0.01μF C4923 1-100-916-11 CERAMIC CHIP 0.1μF C5325 1-100-916-11 CERAMIC CHIP 0.1μF C7028 1-112-065-11 CERAMIC CHIP 4.7μF C4925 1-112-777-11 CERAMIC CHIP 0.01μF...
  • Page 105 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7082 1-112-781-11 CERAMIC CHIP 1μF C7144 1-100-905-11 CERAMIC CHIP 0.001μF 10% C7083 1-112-781-11 CERAMIC CHIP 1μF C7145 1-164-882-11 CERAMIC CHIP 220pF C7146 1-100-904-11 CERAMIC CHIP 330pF C7084...
  • Page 106 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7213 1-100-916-11 CERAMIC CHIP 0.1μF C7258 1-114-332-11 CERAMIC CHIP 22μF 6.3V C7214 1-100-916-11 CERAMIC CHIP 0.1μF C7259 1-114-130-11 CERAMIC CHIP 1μF 6.3V C7260 1-100-916-11 CERAMIC CHIP 0.1μF...
  • Page 107 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7407 1-100-916-11 CERAMIC CHIP 0.1μF C7619 1-100-916-11 CERAMIC CHIP 0.1μF C7408 1-100-916-11 CERAMIC CHIP 0.1μF C7626 1-100-909-11 CERAMIC CHIP 10μF 6.3V C7627 1-100-909-11 CERAMIC CHIP 10μF 6.3V...
  • Page 108 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 109 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 110 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
  • Page 111 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1106 1-218-957-11 RES-CHIP 2.2K 1/16W R2009 1-218-990-81 SHORT CHIP R1107 1-218-989-11 RES-CHIP 1/16W R2022 1-218-945-11 RES-CHIP 1/16W R2023 1-218-945-11 RES-CHIP 1/16W R1108 1-218-957-11 RES-CHIP 2.2K 1/16W R1111...
  • Page 112 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3506 1-218-990-81 SHORT CHIP R5005 1-211-990-11 METAL CHIP 0.50% 1/10W R4701 1-218-937-11 RES-CHIP 1/16W R5016 1-218-953-11 RES-CHIP 1/16W R5019 1-218-977-11 RES-CHIP 100K 1/16W R4702 1-218-937-11 RES-CHIP 1/16W...
  • Page 113 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7070 1-208-721-11 METAL CHIP 0.50% 1/16W R7133 1-218-990-81 SHORT CHIP R7071 1-208-695-11 METAL CHIP 3.3K 0.50% 1/16W R7134 1-218-965-11 RES-CHIP 1/16W R7136 1-218-969-11 RES-CHIP 1/16W R7072 1-208-687-11 METAL CHIP 1.5K...
  • Page 114 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7406 1-208-683-11 METAL CHIP 0.50% 1/16W R7654 1-218-969-11 RES-CHIP 1/16W R7655 1-218-969-11 RES-CHIP 1/16W R7407 1-218-965-11 RES-CHIP 1/16W R7662 1-208-711-11 METAL CHIP 0.50% 1/16W R7411 1-218-938-11 RES-CHIP...
  • Page 115 KDL-40W4100/46W4100/46W4150 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RB2024 1-234-380-21 RES, NETWORK 47K (1005X4) RB5102 1-234-380-21 RES, NETWORK 47K (1005X4) RB2025 1-239-698-11 RESISTOR, NETWORK 10K RB5110 1-234-369-21 RES, NETWORK 10 (1005X4) RB5112 1-234-369-21 RES, NETWORK 10...
  • Page 116 KDL-40W4100/46W4100/46W4150 BU H3E REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES VD1006 1-802-493-21 VARISTOR, NETWORK (1005X2) VD1007 1-802-493-21 VARISTOR, NETWORK (1005X2) VD1051 1-802-078-11 VARISTOR (SMD) VD1052 1-802-493-21 VARISTOR, NETWORK (1005X2) A-1550-477-A H3E BOARD, MOUNTED VD1101 1-802-078-11...
  • Page 117 1-110-501-11 CERAMIC CHIP 0.33μF C6302 1-162-964-11 CERAMIC CHIP 0.001μF 10% A-1494-684-C IP5Z-40S BOARD, COMPLETE C6303 1-100-912-11 CERAMIC CHIP 1μF (KDL-40W4100 ONLY) C6304 1-114-325-11 CERAMIC CHIP 0.1μF A-1511-390-C IP5Z-46S BOARD, COMPLETE (KDL-46W4100/46W4150 ONLY) C6310 1-162-964-11 CERAMIC CHIP 0.001μF 10% 2-580-592-01 SCREW, +PSW M3X8...
  • Page 118 REF. NO. PART NO. DESCRIPTION VALUES C6559 1-112-481-11 CERAMIC 470pF C6718 1-100-831-91 CERAMIC CHIP 0.001μF 2% C6560 1-112-481-11 CERAMIC 470pF (KDL-40W4100 ONLY) C6718 1-100-831-91 CERAMIC CHIP 470pF C6561 1-112-481-11 CERAMIC 470pF C6562 1-112-481-11 CERAMIC 470pF (KDL-46W4100/46W4150 ONLY) C6568 1-112-481-11 CERAMIC...
  • Page 119 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
  • Page 120 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
  • Page 121 KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
  • Page 122 METAL CHIP 1/10W R6708 1-216-833-11 METAL CHIP 1/10W R6531 1-246-388-11 METAL R6714 1-216-834-11 METAL CHIP 1/10W R6533 1-246-388-11 METAL (KDL-40W4100 ONLY) R6534 1-216-833-11 METAL CHIP 1/10W R6714 1-216-834-11 METAL CHIP 1/10W R6541 1-208-820-11 METAL CHIP 0.50% 1/10W (KDL-46W4100/46W4150 ONLY) R6542 1-216-845-11...
  • Page 123 0.50% 1/10W R6795 1-216-841-11 METAL CHIP 1/10W R6751 1-218-881-11 METAL CHIP 0.50% 1/10W R6796 1-218-827-11 METAL CHIP 0.50% 1/10W (KDL-40W4100 ONLY) (KDL-40W4100 ONLY) R6751 1-218-881-11 METAL CHIP 0.50% 1/10W R6796 1-218-827-11 METAL CHIP 0.50% 1/10W (KDL-46W4100/46W4150 ONLY) (KDL-46W4100/46W4150 ONLY) R6752...
  • Page 124 7-632-452-24 TAPE (NO.303) 18MMX35M YEL 2-688-062-01 TAPE (LCD) 3-879-887-01 SHEET, PROTECTION 2-650-770-11 SLIDE, CLAMP 3-299-371-02 CARTON, INDIVIDUAL (40) (KDL-40W4100 ONLY) REMOTE COMMANDER 3-299-372-02 CARTON, INDIVIDUAL (46) 1-480-617-11 REMOTE COMMANDER (RM-YD023) (KDL-46W4100/46W4150 ONLY) 9-885-117-43 COVER, BATTERY (for RM-YD023) 3-287-550-01 CUSHION, UPPER (40)
  • Page 125: Appendix A: Encryption Key Components

    MUST BE RETURNED to Sony. b) and if the core charge is NOT covered under the product warranty, the defective un-repaired or modifi...
  • Page 126 In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to the Service Promotion Department at Service_Promotion@am.sony.com.

This manual is also suitable for:

Kdl-46w4100Kdl-46w4150Rm-yd023

Table of Contents