Filter Replacement - Sharper Image PURIFY 9 Owner's Manual

FILTER REPLACEMENT

GENUINE SHARPER IMAGE FILTERS ARE RECOMMENDED
Peak performance is only realized when genuine Sharper Image True HEPA filters
are used. Others may claim to be compatible with Sharper Image units, but
the Sharper Image Air Purifier is calibrated to achieve a 99.97% capture rate of
particles 0.3 microns or larger, only when used with Sharper Image Filters.
HOW TO REPLACE YOUR FILTERS
1. Turn off and unplug unit.
2. From the back of the product, remove the Filter Compartment Door.
3. Locate one of the Filter Pull Tabs and pull to remove the Filter from the product.
4. Discard used Filter.
5. Wipe down the inside and outside of the product with a soft, damp cloth.
NOTE: Do not use gasoline, thinners, solvents or other chemicals for cleaning.
6. Dust or vacuum the top air outlet and the air inlets on the inside and outside of
the product.
7. Replace with a genuine Sharper Image Purify 9 True HEPA Filter, pressing firmly
to ensure filter is fully positioned inside unit.
16 English
8. Replace Filter Compartment Door.
9. To reset the Filter Replacement Indicator, press and hold (filter replacement
graphic) for approximately 3 seconds until the indicator light has turned off.
NOTE: Take care to remove any plastic bag covering from your replacement
filter. Do NOT operate your Air Purifier without a filter.
English 17