Replay Mode - Canon PowerShot A300 User Manual

Power-saving Function
This camera comes with a power-saving function.
Shooting Mode
The power will automatically shut off approximately 3
minutes after the last function is accessed.

Replay Mode

The power will automatically shut off approximately 5
minutes after the last function is accessed.
While Connected to a Printer (optional)
The power will automatically shut off approximately 5
minutes after the last camera function is accessed or
printer ceases to print an image.
•
The power-saving function will not activate while the
camera is in auto play mode and is connected to a
computer (p. 75).
• The camera's settings can be changed to turn off the
power-saving function (p. 109).
• The LCD monitor will go off in approximately 3 minutes
if there are no operations performed within that time
when the LCD monitor is on, even if the power-saving
function is [Off]. (Note: The power will not be turned off
at that point) Pressing any button turns the LCD
monitor on again.
To return from power-saving function
Shooting Mode
Slide the lever of lens cover down.
Replay Mode / While Connecting to a Printer
Press the button.
Basic Functions
●
Switching between Shooting / Replay
You can quickly switch the between the Shooting
and Replay modes. Images can be replayed and
erased immediately after shooting them. Images can
also be shot immediately, while images are being
replayed.
Shooting Mode
1
Press the
Replay mode.
Press the button again or press the
shutter button halfway to return to the Shooting
mode.
Replay Mode
1
Open the lens cover to switch to
Shooting mode.
●
button to switch to
27