Canon PowerShot A300 User Manual page 116

List of Menu Options and Messages
●
The following table lists and explains the messages that may be on the LCD monitor when printing
to an optional Direct Print Compatible Bubble Jet Printer.
Check the error number displayed on the control panel of Bubble Jet Printer and refer to the
Bubble Jet Printer Quick Start Guide.
(Some BJ printers may not display a message or error code.)
Printer in use
Printer warming up
No print head
Printer cover open
Media type error
Paper lever error
Low ink level
Waste tank full
Printer error
116
: The printer is printing the data from the memory card inserted in the computer or
printer. The printer automatically starts printing the images from the camera after
completing the current printing.
Printer is warming up. When it is ready, the printer starts printing automatically.
: No print head is installed in the printer.
: Close the printer cover securely.
: You selected a paper type incompatible with the printer. Select a compatible paper
type in the Print Style menu.
: Adjust the paper selection lever to the proper position.
: The ink tank needs to be replaced soon. Prepare a new ink tank. If you select
[Continue] in the error screen, you can restart printing.
: You can restart printing by pressing the RESUME/CANCEL button on Bubble Jet
Printer. Please request replacement of the waste tank at your nearest Canon
customer support center listed in the Bubble Jet Quick Start Guide.
: Turn off the printer, then turn it on again. If the error persists, please consult your
nearest Canon customer support center listed in the Bubble Jet Quick Start Guide.
●