Using The Lcd Monitor - Canon PowerShot A300 User Manual

Basic Functions
●

Using the LCD Monitor

Use the LCD monitor for shooting images,
whilst checking images, for menu operations
and replaying images.
The image in the LCD monitor may darken
when the monitor is used under sunlight or
other strong lighting. This is not a defect.
Shooting Mode
The display changes as shown in the following
diagram when the DISP. button is pressed.
LCD monitor display (no information view)
LCD monitor display (information view)
No LCD monitor display
28
●
• The On / Off setting of the LCD monitor
display mode is memorized when the
camera is turned off. When the camera is
turned on again it assumes the last mode.
However, when the LCD monitor is turned
on and the "Change the Batteries" message
appears, the LCD monitor may not
automatically turn on the next time the
camera is started.
• When the LCD monitor is set to On (no
information display) or Off, if you wish to
change the shooting settings, shooting
information will appear for approximately 6
seconds (depending on the camera settings,
this may not be displayed).
• Setting the Shooting mode to
turns the LCD monitor on regardless of
whether it is set to On or Off.
, or