Replay Mode; Information Displayed On The Lcd Monitor; Shooting Mode - Canon PowerShot S110 Digital ELPH User Manual

28 Basic Functions

Replay Mode

Single Image Replay ........... Standard
Index Replay (9 Images) ...................... Standard

Information Displayed on the LCD Monitor

Shooting Mode

In shooting mode, information about the current settings and
remaining image capacity will display on the LCD monitor for
approximately six seconds when the actions below are taken,
regardless of whether the LCD monitor is set to On or Off.
While this information is displayed, you may set the flash,
continuous mode, self-timer, macro and infinity settings.
• The power is turned on.
• The , ,
• The camera settings are changed.
• The Rec. menu is closed.
• The shutter button has been pressed and a shot has been taken.
(LCD monitor must be on)
The resolution, but not
compression, shows in
movie mode.
Remaining Image Capacity
(Recordable seconds remaining
for movies)
(Mode switch set to
• The LCD monitor will turn on when the
mode switch is set to the
• In replay mode, pressing the
button cycles between display modes.
/ , or / button is pressed.
Information Displayed
Shooting Mode
Exposure Compensation
White Balance
Compression
Resolution
Flash
Shooting Method
Macro/Infinity
Zoom Setting*
Camera Blur Warning
* The displayed zoom setting is the combined
effect of the optical and digital zooms. It
displays when the digital zoom is activated.
)
position.
Detailed No Display
No Display
x2.5 / x3.1 / x4.0 / x5.0
p. 36
p. 44
p. 45
p. 37
p. 37
p. 39
p. 42
p. 41
p. 35
p. 27