Canon PowerShot A300 User Manual page 97

To print the date, set the [Date] setting in the print
order menu, in Step 2 on the previous page, to
[On]. You cannot set the date to print with the
[Style] menu in Step 3 on the previous page (p. 94).
If the print type is set to [Index], the date will not
print even if the [Date] setting is set to [On] in Step
2.
When [Print Type] is set to [Both], you can set both
the [Date] and [File Number] to [On] on your
camera. However, if you print the [Index], only the
file number will be printed. (If it's a BJ printer, when
you print the [Index], neither the date nor the file
number will be printed)
When [Print Type] is set to [Standard], the file
number is not printed.
When the Print Type is set to [Index], the
number of images that will be printed
depends on the size of the paper.
• Card Size: 20 images
• L Size: 42 images
• Postcard Size: 63 images
(For information on resolution when printing
with a BJ printer, refer to its manual)
Cancel Printing (p. 86)
Restarting Printing
●
• In the Print Order menu, select [Resume]
using button and press the SET
button. The remaining images can be
printed.
• Printing cannot be restarted under the
following circumstances.
- If the print settings have been changed
before restarting.
- If the image for which the print settings
were set has been deleted before
restarting.
- If there was very little free space on the
CF card when the printing was
cancelled.
If these circumstances apply, you can
select [OK] in the print screen and reprint
starting from the first image. If printing
stops because the battery charge runs
out, change to an AC Adapter Kit
ACK800, or to fully charged AA-size
NiMH batteries before turning the camera
on.
Printing Errors (p. 115)
Printing
●
97