Replay Mode; Information Displayed On The Lcd Monitor; Shooting Mode - Canon PowerShot S100 DIGITAL ELPH User Manual

26 Basic Functions

Replay Mode

Information Displayed on the LCD Monitor

Shooting Mode

In shooting mode, information about the current settings and
remaining image capacity will display on the LCD monitor for
approximately six seconds when the actions below are taken,
regardless of whether the LCD monitor is set to On or Off.
While this information is displayed, you may set the flash,
continuous mode, self-timer, macro and infinity settings.
• The power is turned on.
• The , ,
• The camera settings are changed.
• The Setup menu is closed.
• The shutter button has been pressed and a shot has been taken.
(LCD monitor must be on)
Remaining Image
Capacity
• Sliding the mode switch to the
position turns the LCD monitor on.
• In replay mode, pressing the
button cycles between display modes.
Single Image Replay
Standard
Multi Image Replay (9 Images)
Standard
/ , or / button is pressed.
Information Displayed
Shooting Mode
Exposure Compensation
White Balance
Image Quality
Flash
Shooting Method
Macro/Infinity
Detailed No Display
No Display
p.33
p.40
p.41
p.35
p.36
p.37
p.39