Table of Contents
Advertisement
Quick Links
HDMI H.264 IP VIDEOWALL DECODER/ENCODER
MATRIX MODE & ROTATION SUPPORT
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
OVER CAT/X WITH
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: HDM-C6MWIP-SET-V3
WIRELESS
Advertisement
Table of Contents
Related Manuals for Avenview HDM-C6MWIP-SET-V3
Summary of Contents for Avenview HDM-C6MWIP-SET-V3
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
- Page 2 Product Application & Market Sectors Corporate House of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
-
Page 3: Table Of Contents
TABLE OF CONTENTS GETTING STARTED.......................... 1 IMPORTANTSAFEGUARDS ......................1 SAFETYINSTRUCTIONS ........................1 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISIION (FCC) ......... 2 INTRODUCTION ......................... 3 2.1 PACKAGE CONTENTS ........................4 2.2 BEFORE INSTALLATION ........................4 2.3 APPLICATION DIAGRAM ........................5 2.4 PANEl DESCRIPTION........................6 2.4.1 FRONT PANEL (SENDER/ENCODER, HDM-C6MWIP-S-V3 ............6 2.4.2 REAR PANEL (SENDER/ENCODER, HDM-C6MWIP-S-V3)............6 2.4.3 FROT PANEL (RECEIVER/DECODER, HDM-C6MWIP-R-V3) ............7... -
Page 4: Getting Started
• Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview HDM-C6MWIP-SET-V3, HDMI H.264 IP Matrix Decoder/Encoder has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDM- C6MWIP-SET-V3 should be used with care. -
Page 5: Regulatory Notices Federal Communications Commisiion (Fcc)
DO NOT TAMPER WITH THE UNIT. DOING SO Will VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com... -
Page 6: Introduction
The Avenview HDM-C6MWIP-SET-V3, HDMI H.264 IP Videowall/Matrix Decoder/Encoder delivers end-to-end streaming media over IP networks. The HDM-C6MWIP-SET-V3 is composed of two units a Decoder and an Encoder. The Decoder H.264/ MPEG-4 AVC video compression format, it receives the encoded IP signal through LAN port and decodes video/audio signal out through HDMI interface, it also supports stereo de-embedding and streaming resolutions up to 1920 x 1080@60Hz. -
Page 7: Package Contents
• Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this may result in malfunction of the unit and may cause fire. • Do not twist or pull by force the ends of the UTP cable. It will cause malfunction. www.avenview.com... -
Page 8: Application Diagram
APPLICATION DIAGRAM www.avenview.com... -
Page 9: Panel Description
/sending commands to RS 232 devices. Reset LED, Reset Key: CAT5/6: Used for transporting video/audio streams to Reset LED is on for about 1 second and then off, Decoder RX units connected. release this key, encoder reboots and restores to its factory default. www.avenview.com... -
Page 10: Frot Panel (Receiver/Decoder, Hdm-C6Mwip-R-V3)
/sending commands to RS 232 devices. Reset LED, Reset Key: CAT5/6: Used for transporting video/audio Reset LED is on for about 1 second and then off, streams from Decoder TX units connected. release this key, encoder reboots and restores to its factory default. www.avenview.com... -
Page 11: Installation (Hdm-C6Mwip-Set-V3)
INSTALLATION (HDM-C6MWIP-SET-V3) To setup Avenview HDM-C6MWIP-SET-V3 please follow these steps for connecting to a device: 1. Turn off all devices including monitors / TV. 2. Connect an HDMI source (such as a Blu-Ray Disc player or PC) to the Encoder HDM-C6MWIP-S-V3. -
Page 12: Single Switch Networking
24-port 1000Mbps Ethernet switch: SG350-28, SG350X-24P 24-port 1000Mbps PoE Ethernet switch: SG350-28P, SG350X-24P, WS-C2960S-24PS-L, WS-C2960X-24PSQ-L Other models include: G350X-24P, SG350X-48P, SG500-28, SG500-52MP HUAWEI Brand 24-port 100Mbps Ethernet switch: S2700-26TP-EI-AC 24-port 1000Mbps PoE Ethernet switch: S5700-28P-PWR-LI-AC Other models include: S5700-10P-LI www.avenview.com... -
Page 13: Networking Guide
Most M-Series installations use the POE (Power Over Ethernet) function to power the encoder & decoders units. HDM-C6MWIP-SET-V3 devices are Class 0 rated POE devices, they can require up to 15.4W of power each, but tested their actual power draw is between 5-7W. In order to calculate the number of devices that is recommended on a network switch please divide the total POE power capacity of the switch by 15.4. -
Page 14: Pc Configurator
Network: 10/100 NIC 4.1 Setting a Static IP on Your Computer Before using the Avenview PC Configurator, please ensure you download the most recent version from the product HDM-C6MWIP-S-V3 Sender and HDM-C6MWIP-R-V3 Receiver website link /downloads PC control software. All devices must be in the same network segment. To verify and properly control the devices, please set a static IP on your computer. - Page 15 Double-click Internet Protocol Version 4 (TCP/IPv4). www.avenview.com...
- Page 16 Sender and Receiver. A computer running Windows 7 is used as an example to configure your operating system firewall through either of the following two approaches. Method 1 You can configure the firewall in the Windows Firewall panel on your computer, for example select both Home/Work (Private) and Public for PC Configurator & Matrix. www.avenview.com...
- Page 17 You can also configure the firewall in the Windows Security Alert window. When starting MaintainTool, the Windows Security Alert may display. If so, use the administrator privileges to select a network you allow this software to communicate on, for example select both private and public networks, and then click Allow access. www.avenview.com...
-
Page 18: Specifications
Rear panel LAN port, Control Method PC configurator and CTRLPRO-M via PC configurator and CTRLPRO-M via CTRL PRO using iPad CTRL PRO using iPad Power Supply 12 V 1 A DC 12 V 1 A DC Power Consumption 6W (Max.) 6W (Max.) www.avenview.com... - Page 19 32˚ ~ 104˚F (0˚ to 40˚C) +32°F ~ +113°F (0°C ~ +45°C) OPERATING TEMPERATURE 10% ~ 90%, non-condensing -4˚ ~ 140˚F (-20˚ ~ 60˚C) -4˚ ~ 140˚F (-20˚ ~ 60˚C) STORAGE TEMPERATURE 20~90% RH (no condensation) 20~90% RH (no condensation) RELATIVE HUMIDITY www.avenview.com...
-
Page 20: Troubleshooting
TX to the RX and click apply. 4. Check that source device is powered on and the HDMI cable is connected. Check the displays are powered on and the correct input selection. Check the HDMI cable is plugged into the correct port. www.avenview.com... - Page 21 2. For Window 7/iPad app, please ensure the units are updated with the most recent No Live preview on firmware. Windows7 or iPad App Note: latest firmware are available on Avenview.com on product page. www.avenview.com...
- Page 22 PERFORMANCE GUIDE FOR HDMI OVER CATEGORY CABLE TRANSMISSION PERFORMANCE RATING TYPE OF CATEGORY CABLE WIRING SHIELDING CAT5E CAT6 ✶✶✶✶ ✶✶✶✶ UNSHIELDED (UTP) SOLID ✶✶✶✶ ✶✶✶✶✶ SHIELDED (STP) ✶✶ ✶✶ UNSHIELDED (UTP) STRANDED ✶ ✶✶ SHIELDED (STP) TERMINATION PLEASE USE EIA/TIA-568-B TERMINATION (T568B) AT ANY TIME www.avenview.com...
- Page 23 LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance and reliability if the product(s) is determined to have abide by Avenview’s published guidelines.
- Page 24 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM-C6MWIP-SET-V3 and is the answer not in the manual?
Questions and answers