Table of Contents
Advertisement
Quick Links
H.264 IP CAPTURE TO HDMI ENCODER/
DECODER WITH TELNET AND AUDIO SUPPORT
© 2017 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: HDM-XTRM-IP-SET
WIRELESS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avenview HDM-XTRM-IP-SET
Summary of Contents for Avenview HDM-XTRM-IP-SET
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
- Page 2 Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
-
Page 3: Table Of Contents
TABLE OF CONTENTS GETTING STARTED ..........................1 IMPORTANT SAFE GUARDS......................1 SAFETY INSTRUCTIONS ........................1 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISIION (FCC) ......2 INTRODUCTION ..........................3 2.1 PACKAGE CONTENTS ........................4 2.2 BEFORE INSTALLATION ........................4 2.3 APPLICATION DIAGRAM ........................5 2.4 PANEl DESCRIPTION ........................6 2.4.1 FRONT PANEL (ENCODER, TRANSMITTER) ..............6 2.4.2 REAR PANEL (ENCODER, TRANSMITTER) .................6 2.5.1 FRONT PANEL (DECODER, RECEIVER) ................7 2.5.2 REAR PANEL (DECODER, RECEIVER) ..................7... -
Page 4: Getting Started
• Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview HDM-XTRM-IP H.264 IP stream Encoder/Decoder has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDM-XTRM-IP should be used with care. -
Page 5: Regulatory Notices Federal Communications Commisiion (Fcc)
REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) This equipment has been tested and found to comply with part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Warning symbols Description ONlY USE THE PROVIDED POWER CABLE OR POWER... -
Page 6: Introduction
The Avenview HDM-XTRM-IP-SET, HDMI H.264 IP stream Encoder/Decoder delivers end-to-end streaming media over IP networks. The HDM-XTRM-IP-SET is a total architecture based on the TCP/IP protocol family. This device is engineered to deliver A/V signal over WAN or LAN, video extension -with the help of matching network equipments- can be achieved over... -
Page 7: Package Contents
• u se the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this may result in malfunction of the unit and may cause fire. • Do not twist or pull by force the ends of the UTP cable. It will cause malfunction. www.avenview.com... -
Page 8: Application Diagram
APPLICATION DIAGRAM APPLICATION DIAGRAM 1 Input/Output CAT 5e / CAT 6 APPLICATION DIAGRAM 2 HDM-C6MWIP-R HDM-C6MWIP-R HDM-C6MWIP-R IP CAMERA HDM-C6MWIP-R 10GB NETWORK SWITCH HDM-C6MWIP-S HDM-XTRM-IPR www.avenview.com... -
Page 9: Panel Description
Status LED: Steady Blue Light ON indicates unit is communicating properly. LED blinking waiting on Source 2.4.2 REAR PANEL POWER JACK: 12V DC Power Jack. RESET: Reset device to factory default. HDMI IN: Connect to HDMI/DVI Source. LAN: Used for send video/audio streams to Decoder or over the network. www.avenview.com... -
Page 10: Front Panel (Decoder, Receiver)
LAN: Used to receive video/audio streams to from Encoder. HDMI OUT: Connect to display/TV. AUDIO OUT: Connects to an audio output device such as an amplifier for audio de-embedding. RS-232: RS-232 Data pass-through port for receiving /sending commands to RS 232 device. www.avenview.com... -
Page 11: Installation (Hdm-Xtrm-Ip)
INSTALLATION (HDM-XTRM-SET) To setup Avenview HDM-XTRM-SETplease follow the following steps: Turn off all devices including monitors / TV. Connect an HDMI source (such as a Blu-Ray Disc player or PC) to the Encoder HDM-XTRM-IPS. Connect CAT5/6 from Encoder to exisitng network or the network switch. -
Page 12: Decoding Using Pc Software
5. For the item Dest IP address, set its value to 192.168.1.11, namely, the IP address of your PC, then click Apply; 6. Launch Avenview media player, in the menu bar select Media -> Open Network Stream, input udp://@:12345, then click Play. -
Page 13: Setting A Static Ip On Computer
A Windows 7 PC/Laptop is used as an example to configure a static IP address. Click Start. Choose Control Panel > Network and Internet > Network and Sharing Center > Change Adapter Settings, right click Local Area Connection, and then choose Properties. www.avenview.com... - Page 14 Select Internet Protocol Version 4 (TCP/IPv4) and click Properties Select Use the following IP address. After configuring the settings in the following example, click OK. IP address: 192.168.1.11 Subnet mask: 255.255.0.0 Click OK. www.avenview.com...
-
Page 15: Connecting To Hdm-Xtrm-Ip
CONNECTING TO HDM-XTRM-IP 1. Log in into HDM-XTRM-IP by entering the default IP address: 192.168.10.254 into a web browser 2. Enter default Password: 12345 www.avenview.com... - Page 16 3. "Video" submenu allows: - Change HDCP - Change Bitrate - Change Output Resolution 4. Main page interface includes "Functions" and "System" tabs. www.avenview.com...
- Page 17 5. "Audio" settings allow to choose the encoder Audio "Type" and "Bitrate" 6. "Thiele/Small parameters" Allows changing the specified low frequency performance of a loudspeaker driver www.avenview.com...
- Page 18 7. "Stream" settings allows: - Enable or Disable Streaming - Change "Transport Type" - Change "IP Address" - Change "Port" 8. "Transport Type" can be switched between: User datagram Protocol (UDP) and Real-time transport protocol (RTP) www.avenview.com...
- Page 19 9. "System" allows: - Change device name - Change IP Mode, Subnet mask, Gateway - Change Password - Change Background Picture 10. Cont'd "System" allows: - Check Device Firmware Information - Command control and Reboot - Event Log www.avenview.com...
-
Page 20: Decoding With Hardware Decoder
DECODING WITH HARDWARE DECODER Hardware decoder is optional and provides an alternative way to stream over IP without using a PC or video streaming softwares, please refer to HDM-XTRM-IPR guide for more information. www.avenview.com... -
Page 21: Specifications
1680 x 1050@60Hz, 1080i@50Hz,1080i @60Hz， 1080p@24Hz，1080p@25Hz,1080p@30Hz, 1080p@50Hz, 1080p@60Hz, 1920 x 1200@60Hz VGA: 640 x 480@60Hz, 800 x 600@60Hz 1024 x 768@60Hz, 1280 x1024@60Hz 1280 x720@60Hz， 1280 x 768@60Hz， 1280 x 800@60Hz， 1360 x 768@60Hz,1366 x 768@60Hz, 1440 x 900@60Hz www.avenview.com Page 18... - Page 22 Weight 3 lbs Human body model: ESD Protection -±8kV (air-gap discharge) -±4kV (contact discharge) Environmental 32˚ ~ 104˚F (0˚ to 40˚C) OPERATING TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C) STORAGE TEMPERATURE 20~90% RH (no condensation) RELATIVE HUMIDITY www.avenview.com Page 19...
- Page 23 NSHIEl DED (u Tp) ✶✶✶ ✶✶✶✶ ✶✶✶✶ SOLID SHIEl DED (STp) ✶✶✶ ✶✶✶✶ ✶✶✶✶✶ u NSHIEl DED (u Tp) ✶ ✶✶ ✶✶ STRANDED SHIEl DED (STp) ✶ ✶ ✶✶ TERMINATION PLEASE USE EIA/TIA-568-B TERMINATION (T568B) AT ANY TIME www.avenview.com...
- Page 24 PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
-
Page 25: Technical Support
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM-XTRM-IP-SET and is the answer not in the manual?
Questions and answers