The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Hdmi/dvi down converter to vga with stereo audio (8 pages)
Summary of Contents for Avenview HDM-SPLITPRO-4A
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
• Removal, installation, and set-up service charges. SAfETy INSTRuCTIoNS The HDm-SplITpRo-4A 4x1 Quad multiviewer Scaler with Rotation, Chromakey and Audio and audio has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDm-SplITpRo-4A should be used with care.
Do NoT TAmpER WITH THE uNIT. DoING So WIll VoID THE WARRANTy AND CoNTINuED uSE of THE pRoDuCT. THE VIDEo BoARDS ARE VERy SENSITIVE To STATIC. plEASE ENSuRE If RACk mouNTED oR INSTAllED oN A SuRfACE, IT SHoulD BE IN A GRouNDED ENVIRomENT. www.avenview.com Page 2...
Autodesk Smoke final Cut pro pinnacle Studio Adobe After Effects, and dozens of other computer programs, makes it possible and relatively easy for the average home computer user to create videos using the "Chromakey" function with HDm-SplITpRo-4A. www.avenview.com...
Page 6
Audio Supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/Dolby TruHD & DTS-HD; fine tuning and adjustments of contrast, brightness, Saturation and hue; uSB for Service mode and firmware upgrade; Supports oSD, RS-232, Telnet, IR Remote and front panel buttons; factory Reset; www.avenview.com Page 4...
CoNTENTS Before you start the installation of the converter, please check the package contents. HDm-SplITpRo-4A X 1 poWER Supply (12V 3A) IR REmoTE uSER’S mANuAl BEfoRE INSTAllATIoN • put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
DESCRIpTIoN 3.1 INPUT PANEL (HDM-SPLITPRO-4A) Front Power Button: Toggle oN/off first press power on Second press Standby mode. IR Window: Receives IR signals from the device Note : Quick Factory Reset remote control (Included in package) HolD power button then connect power supply to the unit.
3.2 INPUT PANEL (HDM-SPLITPRO-4A) Rear HDMI IN 1-4: Connect up to 4 HDmI devices to the HDMI OUT: Connect a single HDmI HD monitor/ INpuT ports 1-4( Blu-ray /Set-Top Box or pC) Displays to view inputs connected. Ethernet Control: Connect RJ45 jack to an active...
13. ROTATION: This button rotates the image 90˚ left and right or 180˚ 14. AUDIO 1-4: These buttons select AuDIo from HDmI input source 1~4. * Audio function only work under A to D. The system will force to switch to Window A when operate under Window E~H. www.avenview.com Page 9...
4. Connect your HDmI cables to the single HD Displays, lCD or pC monitors that is receiving the video signals. 5. power on all devices. 6. Connect your computer to HDm-SplITpRo-4A via RS232, RS-232 to uSB or Ethernet cable in order to control via Telnet or RS232.
SpECIfICATIoNS Item Description UNITS HDm-SplITpRo-4A UNIT DESCRIPTION 4x1 HDmI Quad multiviewer with Rotation and Chromakey HDCP COMPLIANCE VIDEO BANDWIDTH 225 mHz (6.75Gbps) HDMI INPUT CABLE DISTANCE up to 10m/1080p@12 bits HDMI OUTPUT CABLE up to 10m/1080p@8 bits DISTANCE pC -VGA, XGA (1024 x 768), SXGA (1280 x 1024), uXGA (1600 x 1200),...
Page 15
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM-SPLITPRO-4A and is the answer not in the manual?
Questions and answers