Advertisement
HDM-6IP4K-SET VideoWall and Switch
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
Configuration Guide
VIDEO PROCESSORS
MULTIVIEWERS
DIGITAL
EXTENDERS
CONTROL
SCALERS WIRELESS
Model #: HDM-C6IP4K-SET
SIGNAGE
CENTERS
Advertisement
Table of Contents
Related Manuals for Avenview HDM-C6IP4K-SET
Summary of Contents for Avenview HDM-C6IP4K-SET
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
- Page 2 INTRODUCTION Avenview HDM-C6IP4K Overview The Avenview HDM-C6IP4K-SET features a chipset that enables extension, switching and compositing of real-time, uncompressed Ultra-HD AV signals with zero-frame latency over off-the-shelf (OTS) Layer 2/ Layer 3 Ethernet switches In addition of that, it also can extend 8 channels of audio, 1 Gb Ethernet, 480 Mbit/sec USB 2.0...
-
Page 3: Initial Setup
(RX). Each unit has a label at the bottom to indicate if it is a transmitter “TX” or receiver “RX”. If you received the fiber version of the Avenview Evaluation Kit, you will find four (4) SFP fiber optic transceivers included in the package. These should be inserted into the SFP slots of TX and RX units before use. -
Page 4: General Information
(Windows 7 SP1 or Windows 8.1/10 is recommended). The PC running BlueRiver Manager can be connected to the GbE port of any Avenview device or to any RJ45 port of the 10GbE switch except the management/console port of the switch which is not part of the network. - Page 5 VIDEO WALL Multiple Avenview devices can be grouped together to form a video wall. To experiment with this functionality, select the “DisplayWall” tab in the main window. Start with configuring the wall size. Then drag and drop RX units onto the matrix that corresponds to the wall size entered previously.
- Page 6 SWITCH CONFIGURATION Avenview devices make use of IP multicast to route packets between TX and RX devices. To maintain a map of which links need which IP multicast streams, the switches take use of IGMP Snooping. Some switches have the IGMP Snooping feature disabled by default and manual configuration is required to enable it.
Need help?
Do you have a question about the HDM-C6IP4K-SET and is the answer not in the manual?
Questions and answers