Fade In/Out Functions; Backlight Compensation Function - Panasonic Palmcorder Multicam PV-GS33 Operating Instructions Manual

2
Press the Recording Start/Stop Button
or [PHOTO SHOT] Button
recording.
(35)
PHOTO SHOT
(41)
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] >> [CAMERA]
>> [EIS] >> [OFF].
≥For other notes concerning this item, see

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually
from a black screen at the beginning of a scene.
1
Keep pressing the [FADE] Button
during the Recording Pause Mode.
STILL
ENTER
s i
(12)
FADE
≥The image fades out gradually.
2
When the image is completely gone, press
the Recording Start/Stop Button
start recording.
(41)
3
Release the [FADE] Button
3 seconds after starting recording.
≥The image reappears gradually.
Fade Out
Fade Out causes images and sounds to
disappear gradually, leaving a black screen at the
end of a scene.
Recording Mode
(41)
(35)
to start
.
-48-
(12)
(41)
to
(12)
about
-25-
1
Keep pressing the [FADE] Button
recording.
STILL
ENTER
s i
(12)
FADE
≥The image fades out gradually.
2
When the image is completely gone, press
the Recording Start/Stop Button
recording.
(41)
3
Release the [FADE] Button
≥The still picture cannot fade in or fade out.

Backlight Compensation Function

This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that
shines from behind the subject being recorded.)
1
Press the [BACK LIGHT] Button
(8)
BACK
LIGHT
≥The [ª] Indication flashes and then is
displayed.
≥The entire screen becomes brighter.
To Resume Normal Recording
Press the [BACK LIGHT] Button.
≥For other notes concerning this item, see
(12) while
(41)
to stop
(12) .
(8) .
ª
.
-48-