Image Stabilizer Function; Fade In/Out Functions; Backlight Compensation Function - Panasonic PV-GS19 Operating Instructions Manual

Image Stabilizer Function

If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images may
not be stabilized.
• Set to Tape Recording Mode.
1
Set [ ADVANCE] >> [
• The [ ] Indication appears.
35
30
2
Press the Recording Start/Stop Button
or [PHOTO SHOT] Button
31
recording.
25
31
To Cancel Image Stabilizer Function
Set [ ADVANCE] >> [
• For other notes concerning this item, see page 67.

Fade In/Out Functions

• Fade In :
The image and audio gradually appear.
• Fade Out :
The image and audio gradually disappear.
• Set to Tape Recording Mode.
1
Set [ SETUP] >> [
[BLACK] or [WHITE].
35
30
2
Press the Joystick Control
the One-Touch Navigation icon on the
lower right of the screen.
35
Recording Mode
EIS] >> [ON].
S P 3 h 5 9 m 5 9 s 2 9 f
0
: 5 6 A M
2 2 0 0 5
to start
25
EIS] >> [OFF].
FADE COLOR] >>
to display
35
[One-Touch Navigation icon]
1/2
3
Move the Joystick Control [◄]
[ ].
35
• The [ W] or [ B] Indication flashes and then
is displayed.
4
Press the Recording Start/Stop Button
31
Start recording. (Fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.
Pause recording. (Fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording stops.
To Cancel Fading
Move the Joystick Control [◄] to select [
• For other notes concerning this item, see page 67.

Backlight Compensation Function

This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that shines
from behind the subject being recorded.)
• Set to Tape/Card Recording Mode.
1
Press the Joystick Control
the One-Touch Navigation icon on the
lower right of the screen.
35
to select
35
[One-Touch Navigation icon]
1/2
.
31
] again.
to display
35
[One-Touch Navigation icon]
1/2
31