Table of Contents
Advertisement
The One-touch Free Style Grip Belt
ª To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of
your hand.
1
Detach the end of the Grip Belt.
2
Adjust the length of the Grip Belt to the size
of your hand.
3
Reattach the Grip Belt.
ª To Use as a Hand Strap
Using the Grip Belt as the hand strap makes it
easier to handle and carry a Camcorder. It is
more convenient to use with the Magic Wire
Remote Control with Narration Mic (optional).
1
Open the Lock Cover
tabs on both sides 1, press the Lock
Button
(19)
and detach the Grip Belt.
(20)
1
2
Detach the end of the Grip Belt.
3
Slide A in the direction of the arrow and
reattach the Grip Belt.
Before Use
(20)
by holding the
(19)
A
4
Attach the Grip Belt around your wrist.
≥When returning the Grip Belt to the Grip Belt
Attachment, press the Lock Cover 2 to ensure
that it is securely locked.
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass one end of the Lens Cap Cord through
the attached eye on the Lens Cap. Then
pass the other end through the loop made
by itself and pull tight.
2
Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment and the
Lens Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
≥When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
-15-
2
Hide quick links:
Advertisement
Table of Contents
