Digital Zoom Function; Image Stabilizer Function - Panasonic Palmcorder Multicam PV-GS33 Operating Instructions Manual

ª To Take Close-up Shots of Small
Subjects
(Macro Close-up Function)
When the zoom magnification is 1k, the
Camcorder can focus on a subject that is as close
as approximately 1.6 inches (4 cm) from the
Lens. Small subjects like insects can be recorded
with this function.
ª To Use the Tele-Macro Function
With the zoom magnification of 10k, the
Camcorder can bring the subject into focus as
close as approximately 7.8 inch (20 cm) from the
Lens. Focusing only on the subject and displaying
the background out of focus makes the picture
more impressive.
1
Press the [TELE MACRO] Button
(5)
TELE
MACRO
≥The zoom magnification is fixed at 10k and
the subject can be focused on as close as
7.8 inch (20 cm).
≥The [
] Indication appears.
T.MACRO
2
Press the Recording Start/Stop Button
or the [PHOTO SHOT] Button
(35)
PHOTO SHOT
(41)
To Cancel the Tele-Macro Function
Press the [TELE MACRO] Button.
ª To Use the Zoom Microphone
Function
Along with the zooming operation, the
microphone's directional angle and sensitivity are
varied for recording sounds.
≥Set [TAPE RECORDING MENU] >>
[RECORDING] >> [ZOOM MIC] >> [ON]. (The
[Z.MIC] Indication is displayed.)
≥For other notes concerning this item, see
Recording Mode
(5)
.
T.MACRO T.MACRO
(41)
(35)
.
Z.MIC Z.MIC
.
-48-

Digital Zoom Function

This function is useful when you want to record
close-up shots of subjects located beyond a
normal zoom range of 1k to 10k magnification.
With the Digital Zoom Function, you can select a
magnification from 25k up to 700k.
1
Set [TAPE RECORDING MENU] >>
[CAMERA] >> [D.ZOOM] >> [25t] or [700t].
STILL
ENTER
s
FADE
(14)
≥25k: Digital zooming to 25k
≥700k: Digital zooming to 700k
2
Push the [W/T] Lever
towards [T] to zoom in or out.
VOL/JOG
W
(36)
To Cancel the Digital Zoom Function
Set [TAPE RECORDING MENU] >> [CAMERA]
>> [D.ZOOM] >> [OFF].
≥For other notes concerning this item, see

Image Stabilizer Function

If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
≥If the Camcorder shakes too much, the images
may not be stabilized.
1
Set [TAPE RECORDING MENU] >>
[CAMERA] >> [EIS] >> [ON].
STILL
ENTER
s
FADE
(14)
≥The [EIS] Indication appears.
-24-
i
MENU
20tW T
D.ZOOM
(36) towards [W] or
T
i
MENU
EIS
.
-48-