Table of Contents
Advertisement
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. (
)
-18-
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the MagicPix Function is ON
≥When the Portrait Mode is used
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1
Set [INITIAL] >> [INITIAL SET] >> [YES].
≥The initializing takes for a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears.
≥Initializing will not erase the clock setting (
that has been adjusted.
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the
Camcorder.
3DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred.
Y (CHECK REC TAB):
The accidental erasure prevention switch
on the inserted Cassette is open (that is, set
to [SAVE]).
You are attempting Audio dubbing or Digital
dubbing on a Tape while setting the
accidental erasure prevention switch to
[SAVE].
Y (TAPE NOT INSERTED):
No Cassette in inserted.
6 (LOW BATTERY):
The Battery is low. Recharge it.
0: The built-in battery is low.
: (NEED HEAD CLEANING):
The video heads are dirty.
2END (TAPE END):
The tape came to end during recording.
)
-18-
-20-
-52-
-16-
-14-
-20-
-53-
Others
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected.
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape
section that has been recorded with a
different TV system.
UNABLE TO A.DUB
(LP RECORDED):
Because the original recording was done in
LP Mode, audio dubbing cannot be
performed.
INCOMPATIBLE TAPE:
This cassette is incompatible.
PUSH THE RESET SWITCH:
Irregular mechanism is detected. Press the
[RESET] Button (
problem.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded
correctly.
CASSETTE DOOR OPEN:
Close the Cassette Compartment Cover
before recording.
Notes and Hints
ª Concerning the Power Supply
≥When the Camcorder is used for a long time,
)
the Camera body becomes warm, but this is not
a malfunction.
≥If the [CHARGE] Lamp does not light up
although the Battery is attached to the AC
Adaptor, detach the Battery and reattach it.
ª Inserting/Removing the Cassette
≥In the case of using a previously recorded
Cassette, you can use the Blank Search
Function to find the position where you want to
continue recording.
≥If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces
in the right direction and then push it in until it
stops.
≥When the Cassette Holder is in action, do not
touch anything except the [PUSH] Button.
≥When closing the Cassette Compartment
Cover, do not get anything caught in the cover,
such as a cable of an optional stereo
microphone.
-47-
-13-
). This may solve the
-11-
Hide quick links:
Advertisement
Table of Contents
