Operating; Starting The Device; Main Menu - Ignition Co6z LED Flood User Manual

Zoom flood rgbw

Table of Contents

Operating

Co6z LED Zoom Flood IP65 270W RGBW

LED floodlight

Connect the device to the power supply to start operation. The display shows

'Software-Update 'Please Wait - Welcome to LED Wash Zoom'' . During the start-up

process, the display shows the model name and the software version of the device

successively. The device is then ready for use. The display shows the operating mode

that was selected when the unit was last powered off.

If the display is in standby, unlock it: Successively press [UP], [DOWN], [UP], [DOWN]

and [ENTER].

Press [MODE] to activate the main menu. Use the buttons [UP] or [DOWN] to select a

submenu. When the display shows the desired submenu, press [ENTER] to open it. To

close the main menu, press [MODE]. The stored values are displayed in white in the

display. Changed values are displayed in red until they are confirmed by [ENTER] .

Table of Contents

Co6z