Using the Face Self-Timer
Changing the number of shots
After choosing
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately
15 seconds later.
•
If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer
The shutter will release approximately two seconds after the camera detects
a new face
(p.
84). You can use this when the photographer wants to be in
the image, such as a group photo.
Downloaded From camera-usermanual.com Canon Manuals
66
in Step 1, press the op buttons.
Choose
●
Follow Steps 1 – 2 on
then press the n button for more than
one second.
●
Press the qr buttons or turn the  dial to
choose
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
.
p. 61
to choose
, then press the n button.
,