Table of Contents
Advertisement
en Basic settings
Basic setting
Eco forecast
emotionLight
Front display
Start programme
Tone volume
Button volume
autoOpen Dry
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for approx. 3 seconds.
Press
repeatedly until the display
3.
shows the required setting.
Press
or
4.
display shows the right value.
38
Selection
on
1
off
off
On via main switch
On on opening door
1
on
off
1
Eco 50°C
Last selected pro-
gramme
Scale with multiple
levels.
Scale with multiple
levels
off
On in all programmes
On with Eco 50°
on
1
off
off
1
Manuell
Dauerhaft
1
on
off
Reset
repeatedly until the
Description
Switch EcoCheck on or off.
When selecting the programme, the average wa-
ter consumption and energy consumption is
briefly shown on the display.
Switch the interior lighting of the appliance on or
1
off.
When the appliance door is opened, the interior
lighting switches off automatically after 10
minutes.
Switch the front display on or off.
Set a default programme for when the appliance
is switched on.
→ "Programmes", Page 19
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Set the button volume during operation.
Level 0 switches the button tones off.
Activate or deactivate automatic opening of the
appliance door during the drying phase.
1
→ "autoOpen Dry", Page 12
Switch the wireless network connection on or off.
Activate or deactivate
→ "Remote Start ", Page 40.
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
You can change several settings.
To save the settings, press
5.
approx. 3 seconds.
Setting the time
To open the basic settings, press
1.
for approx. 3 seconds.
for
Advertisement
Table of Contents
