Siemens SN27YI01CE User Manual page 47

Fault
E:3200 or indicator for wa-
ter supply lights up.
E:9240 lights up.
E:6103 lights up. Water is
not drained.
E:6102 lights up.
Cause
The filters in the water con-
nection of the supply or
AquaStop hose are blocked.
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Troubleshooting en
Troubleshooting
Switch off the appliance.
1.
Pull out the mains plug.
2.
Turn off the water tap.
3.
Unscrew the water connection.
4.
Remove the filter from the supply
5.
hose
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
▶
→ "Cleaning filters", Page 43
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 58
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
47