Remote Controlling Sound Effects; Adjusting Dolby Pro Logic 'S "Music " Mode; Adjusting Neo:6'S "Music " Mode - Panasonic SA-BX500 Operating Instructions Manual

Remote controlling sound effects

ENTER
SUB MENU
S
30
RQT9223
See pages 28 and 29 for information about each mode.
Adjusting Dolby Pro Logic
You can use the following modes when the input source is 2-channel stereo.
Dimension Control
■
You can make up for differences in the output level of the front and surround speakers.
1. Press [
2. Press [
and press [OK] to confirm.
3. Press [e][r] to select "DIMEN ", and press [OK] to confirm.
4. Press [e][r] for adjustment, and press [OK] to confirm.
Adjustment range: -3 (More surround sound) to +3 (More front sound)
Factory setting: 0
Center Width Control
■
In this mode, you can play music more naturally by adjusting sounds assigned to front and
center speakers as a whole.
1. Press [
2. Press [
and press [OK] to confirm.
3. Press [e][r] to select "C-WIDTH ", and press [OK] to
confirm.
4. Press [e][r] for adjustment, and press [OK] to confirm.
Adjustment range: 0 (Center becomes clearer) to 7 (Center becomes wider)
Factory setting: 3

Adjusting NEO:6's "MUSIC " mode

TV/VIDEO
You can use the following mode when the input source is 2-channel stereo.
Center Image Control
■
In this mode, you can play music more naturally by adjusting sounds assigned to front and
center speakers as a whole.
1. Press [NEO:6] to activate NEO:6.
2. Press [NEO:6], next press [e][r] to select "MUSIC ", and
press [OK] to confirm.
3. Press [e][r] to select "C-IMAGE ", and press [OK] to confirm.
4. Press [e][r] for adjustment, and press [OK] to confirm.
Adjustment range: 0 (Center becomes clearer) to 5 (Center becomes wider)
Factory setting: 2
PL ] to activate Dolby Pro Logic
PL ], next press [e][r] to select "MUSIC ",
PL ] to activate Dolby Pro Logic
PL ], next press [e][r] to select "MUSIC ",
's "MUSIC " mode
.
.