Using Headphones; Recording - Panasonic SA-BX500 Operating Instructions Manual

Using headphones

WIRELESS READY
MULTI CH MULTI CH SURROUND M.ROOM
PROCESSING TrueHD D+ DTS-HD LPCM BI-AMP
POWER SURROUND SPEAKERS A SPEAKERS B
AUTO SPEAKER SETUP
AUX
SETUP MIC
S VIDEO VIDEO L - AUDIO - R
SPEAKERS B
SPEAKERS A
(Headphone jack)
ENTER

Recording

WIRELESS READY
MULTI CH SURROUND M.ROOM
MULTI CH
PROCESSING TrueHD D+ DTS-HD LPCM BI-AMP
POWER SPEAKERS B
SURROUND SPEAKERS A AUTO SPEAKER SETUP
AUX
SETUP MIC
VIDEO L - AUDIO - R
S VIDEO
VOLUME
INPUT SELECTOR
_
+
-SETUP OK TUNE
RETURN
VOLUME
_
+
VOLUME
INPUT SELECTOR
_
+
OK
RETURN -SETUP TUNE
INPUT SELECTOR
1. Press [SPEAKERS A] and [SPEAKERS B] to
switch all speakers off.
2. Lower the volume by pressing [VOL
and connect headphones to the unit.
Plug type: ø 6.3 mm stereo standard plug
3. Adjust the volume by pressing [VOL
Note
• Avoid listening for prolonged periods of time to prevent
hearing damage.
• Playback channels become two when you switch all
speakers off. The 2-channel mix (2CH MIX) function activates
automatically when you play a surround source. (Excluding
DVD-Audio sources that do not allow down-mixing)
• The ANALOG 8CH (➔ page 27) goes off and front two
channels make audio output when you play sources through
analog 8-channel connections (➔ page 20).
• Excessive sound pressure from earphones and headphones
can cause hearing loss.
You can record to a DVD recorder connected to DVD
RECORDER OUT terminal (AUDIO, VIDEO, S VIDEO)
(➔ page 21).
See the recording unit's operating instructions for details on
how to prepare it for recording.
1. Press [INPUT SELECTOR] to select the
source to be recorded.
• You can also switch input sources using [INPUT
SELECTOR] on this unit.
2. Start recording sounds and images for
the recording destination (equipment).
3. Start playing back the recording
source (sound source) of the recording
destination (equipment).
Note
• Sounds coming into the input terminal of DVD recorder are
not produced from the output terminal of DVD recorder.
• When recording from a Blu-ray Disc/DVD player, DVD
recorder, VCR, Cable box, Satellite receiver, CD player, Video
game or TV ensure the source is connected through the
analog input terminals and "ANLG " input is selected
(➔ page 39).
• When you select ANALOG 8CH mode, only sound from the
front left and right channels is recorded.
• Do not turn the unit off during operation.
+, –]
+, –].
41
RQT9223