Remote Controlling A Tv Or Dvd Recorder Etc; Remote Controlling A Tv, Cable Box And Satellite Receiver; Using Two Or More Panasonic Equipment (A Mini Component System, An Av Amp Etc.) - Panasonic SA-BX500 Operating Instructions Manual

Remote controlling a TV or DVD recorder etc.

Besides this unit, you can operate a Panasonic TV, cable box and satellite receiver, DVD recorder and Blu-ray Disc/DVD player, (excluding
certain models) using the supplied remote control. See respective equipment's operating instructions for detailed operations.

Remote controlling a TV, cable box and satellite receiver

Aim the remote control at the
equipment you wish to operate.
ENTER
SUB MENU
S

Using two or more Panasonic equipment (a mini component system, an AV amp etc.)

Two or more pieces of Panasonic audio equipment may start functioning when you operate the unit using the supplied remote control.
Switch the unit's remote control mode to "REMOTE 2 " in such cases.
Do the following to set the same number as the remote control mode.
(Operations on the unit)
1. To enter the SETUP (➔ page 36)
2. Turn [INPUT SELECTOR] to select "REMOTE ", and press [OK]
to confirm.
3. Turn [INPUT SELECTOR] to select "1 " or "2 ", and press [OK]
to confirm.
"1 ": (Factory setting): Set the unit's remote control mode to 1.
"2 ": Set the unit's remote control mode to 2.
4. To finish the setting (➔ page 36)
42
RQT9223
Do not forget to press this
before operating a TV.
Do not forget to press this
before operating cable box
or satellite receiver.
TV/VIDEO
WIRELESS READY
MULTI CH
MULTI CH SURROUND M.ROOM
PROCESSING TrueHD D+ DTS-HD LPCM BI-AMP
POWER SURROUND SPEAKERS A SPEAKERS B AUTO SPEAKER SETUP
SETUP MIC AUX
S VIDEO VIDEO L - AUDIO - R
To switch the unit's input to "TV "
To switch the remote control to the TV
operation mode
To switch the unit's input to "CABLE/SAT "
To switch the remote control to the cable box
or satellite receiver operation mode
To turn the equipment on or off
(TV only)
TV/VIDEO
To switch the TV's input mode
(TV only)
To adjust the TV volume
To select a channel
• When you make a selection in rising or falling order.
To select a channel
• When you select a channel directly.
ENTER
VOLUME
INPUT SELECTOR
_
+
RETURN -SETUP OK TUNE
(Operations on the remote control)
5. Press [FM/AM].
6. Press [1] or [2] and [OK] simultaneously and hold them
in the position for about 2 seconds.
[1]: (Factory setting): Set the remote control mode on the
remote control to 1.
[2]: Set the remote control mode on the remote control to 2.
• Select the same number as the mode number you have
selected in step 3.
7. Press [OPTION PORT, –SETUP].
8. Press [1] or [2] and [OK] simultaneously and hold them
in the position for about 2 seconds.
[1]: (Factory setting): Set the remote control mode on the
remote control to 1.
[2]: Set the remote control mode on the remote control to 2.
• Select the same number as the mode number you have
selected in steps 3 and 6.
INPUT SELECTOR
OK