Listening To Surround Sound; Dolby Pro Logic; Neo:6; Sfc (Sound Field Control) - Panasonic SA-BX500 Operating Instructions Manual

Listening to surround sound

You can add surround effects or create surround sound from 2-channel stereo sources.
ENTER
SUB MENU
S
28
RQT9223

Dolby Pro Logic

Dolby Pro Logic
The technology enables you to play 5.1-channel Dolby Digital and DTS sources on
7.1 channels (when two surround back speakers are connected to the unit) and on
6.1 channels (when only one surround back speaker is connected).
The technology makes surround back channels available for the playback of Dolby Digital
Surround EX sources.
Press [ PL
Press [
MOVIE   MUSIC  EX or GAME
To cancel:

NEO:6

NEO:6 offers you surround playback of 2-channel stereo sources.
The technology enables you to play 5.1-channel Dolby Digital and DTS sources on 6.1
channels.
Press [NEO:6].
Press [NEO:6], and then press [e] [r] to change the mode.
CINEMA   MUSIC
To cancel:

SFC (Sound Field Control)

You can add presence and spread to surround sound according to your preference.
 MUSIC
TV/VIDEO
Use this mode when playing music.
Press [SFC MUSIC].
Press [SFC MUSIC] again to change the mode.
LIVE  POP/ROCK  VOCAL  JAZZ  DANCE  PARTY
You can also select each of the following modes by pressing [SFC MUSIC], and [e] [r]
in succession.
To cancel:
 MOVIE
Use this mode when playing movies.
Press [SFC MOVIE].
Press [SFC MOVIE] again to change the mode.
NEWS  ACTION  STADIUM  MUSICAL  GAME
You can also select each of the following modes by pressing [SFC MOVIE], and [e] [r]
in succession.
To cancel:
Note
• Surround effects may be unavailable depending on sources.
• These settings remain effective after the unit goes off.
• The unit makes output through speakers according to the number of channels recorded in
sources when you switch Dolby Pro Logic
Example: The unit makes output through front speakers, the center speaker, surround
speakers, and the subwoofer when you play 5.1-channel sources. Surround
back speakers go silent.
offers you surround playback of 2-channel stereo sources.
].
PL ], and then press [e] [r] to change the mode.
Press [SURROUND, OFF].
Press [SURROUND, OFF].
Press [SURROUND, OFF].
Press [SURROUND, OFF].
, NEO:6 or SFC off.