Sound Quality/Sound Field/Convenient Functions - Panasonic SA-XR55 Operating Instructions Manual

Sound quality/Sound field/Convenient functions

SPEAKERS
A B DUAL AMP BI-AMP BAND PRESET TUNE
VCR 2
VIDEO IN L AUDIO IN R
Basic operations with the MULTI CONTROL
INPUT SELECTOR
Turn to change.
n To return to the previous setting/To cancel
Press.
MULTI n To select another settings
CONTROL
Press several times to return to step 2 in the
CANCEL
operations across and select another setting.
n To finish settings
Press several times to select "EXIT " and
press [ENTER].
áPage 25 "Multi control menus and factory settings".
18
INPUT SELECTOR
MULTI
CONTROL ENTER
CANCEL
INPUT SELECTOR VOLUME
MULTI
CONTROL ENTER
CANCEL
DOWN UP PHONES
Press to enter.
ENTER
Adjusting the level of each surround effect
áRefer to page 15 for information about surround effects.
Using Dolby Pro Logic
You can adjust the effect of "MUSIC " with "DIMEN "
(Dimension Control), "C-WDTH " (Center Width Control) and
"PANORAMA ". (Only when the input signal is 2-channel.)
DIMEN (Dimension Control)
You can make up for differences in the output level of the front and
surround speakers. You can choose a level between –3 and +3 - Increase
the level to move sound to the front speakers, decrease to move it to the
surround speakers.
Select. Adjust.
DIMEN 0
C-WDTH (Center Width Control)
This adjustment helps you realize a more natural sound image when
listening to music. Move sound out into the front speakers to improve
the overall front image, or add sound to the center speaker to fix the
center image. You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
Select. Adjust.
C-WDTH 3
PANORAMA
Sound is spread out more so you feel like you are surrounded by music.
Select. Select.
PANORAMA
Using DTS NEO:6
You can adjust the effect of "MUSIC " with the center image
control.
C-IMG (Center Image Control)
This adjustment helps you realize a more natural sound image when
listening to music. Move sound out into the front speakers to improve
the overall front image, or add sound to the center speaker to fix the
center image. You can choose a level between 0 (the center speaker is
dominant) and 5 (center sound is spread out).
Select. Adjust.
C-IMG 2
Using the Sound Field Control (SFC)
You can adjust the sound field by adjusting the level of
the speakers and effect. These adjustments can be
made for each SFC mode.
To adjust the speaker level
Select. Adjust.
• Speakers set as "_" (not connected) in "Speakers combination
settings" are skipped. (ápage 12)
To adjust SFC effect
Select. Adjust.
Factory setting: 0
Factory setting: 3
: Factory setting
Factory setting: 2
Factory settings: 0 dB
Factory setting: 10
Factory setting: 5