Table of Contents
Advertisement
SNMP Setting
Click "SNMP" on the left side of HOME.
This function allows for getting status and controlling of a monitor via the network.
Version:
SNMP v1
Authenticated plaintext by community name, not return a confi rmation message of Trap.
SNMP v2c Authenticated plaintext by community name, return a confi rmation message of Trap.
Community name:
The default setting of community name is "public". It is read only. You can set community names for up to 3 settings.
Trap:
Sending error message to specifi ed address when an error occurs in the monitor.
Check Box
Temperature
Fan
Power
Inverter/Backlight
No Signal
PROOF OF PLAY
System Error
Explanation
Temperature abnormal
Cooling fan abnormal
Power abnormal
Inverter or backlight abnormal 0x90, 0x91
No signal
Lower the log storage
System error
English-42
Error code
0xA0, 0xA1, 0xA2
0x80, 0x81
0x70, 0x71, 0x72, 0x78
0xB0
0xD0
0xE0
Advertisement
Table of Contents
