Osd - NEC MultiSync X651UHD-2 User Manual

TEXT TICKER* 1
MODE
POSITION
SIZE
DETECT
PICTURE1
PICTURE2
RESET

OSD

LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
РУССКИЙ
MENU DISPLAY TIME
OSD POSITION
UP
DOWN
RIGHT
LEFT
INFORMATION OSD
COMMUNICATION
INFO
MONITOR INFORMATION Indicates the model and serial number of your monitor and fi rmware version.
OSD TRANSPARENCY
OSD ROTATION
LANDSCAPE
PORTRAIT
INPUT NAME
MEMO
RESET
*1: When you select OPTION for multi picture input, this function depends on which option board you use.
Enables Text Ticker and allows you to set Horizontal or Vertical direction.
Selects the location of the Text Ticker on the screen.
Determines the size of the Text Ticker in relationship to the overall screen size.
Enables auto-detection of the Text Ticker.
Selects input signals.
Selects input signals.
NOTE: When this function is active, POINT ZOOM, STILL and ROTATE are not available.
Resets MULTI PICTURE CONTROL options back to factory settings except for INPUT SELECT
and PICTURE ASPECT.
Select the language used by the OSD.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Determines the location where the OSD appears on the screen.
Selects whether the information OSD is displayed or not. The information OSD will be displayed
when the input signal or source changes. The information OSD will also give a warning when
there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
MONITOR ID and IP ADDRESS will be displayed when the remote control Display button is
pressed.
CARBON SAVINGS: Display the estimated carbon saving information in kg-CO2. The carbon
footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
CARBON USAGE: Display the estimated carbon usage information in kg-CO2. This is the
arithmetic estimation, not actual measurement value. This estimation is based without any
options.
Set the transparency of the OSD.
Determines the OSD display direction between landscape and portrait.
Display the OSD with landscape mode.
Display the OSD with portrait mode.
You can create a name for the INPUT currently being used.
Max: 8 characters, including Space, A-Z, 0-9, and some symbols.
Sets a title and message via HTTP server. See page 45.
Resets the following settings within the OSD menu back to factory setting:
MENU DISPLAY TIME, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY.
English-26
OFF
-
ENGLISH
(Depends on
destination)
30 SEC.
X = 128, Y = 225
ON, 3 SEC.
ON
-
OFF
LANDSCAPE
-
-
-