NOTE: Following feature sets are not supported by the InfinityBoard models: - Table Top Stand Option: Other than the standard monitor, the NEC InfinityBoard does not allow for table top installations, as the table top brackets has been removed - Room Light Sensing Sensor: Other than the standard monitor, the NEC InfinityBoard does not allow the monitor to make automatic adjustments to the backlight setting.
WARNING: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. MultiSync is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and other countries. DisplayPort and DisplayPort Compliance Logo are trademarks owned by Video Electronics Standards Association in the United States and other countries.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety standards in the country of purchase.
Safety Precautions, Maintenance & Recommended Use Safety Precautions and Maintenance Refer to the instruction explained on page English-3 of the standard user’s manual of the monitor. Cleaning the Glass Surface • The glass surface should be cleaned regularly with a soft, lint free cloth. •...
Unpacking Unpacking the Display Unpack the display (X551UHD IGB) from the carton box by removing the white clips on the bottom of the box. NOTE: Due to the weight of the product, for installation and handling 4 people are required. DO NOT start unless you have enough people available.
NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation. Failure to...
InfinityBoard Assembly Instruction Mounting of Collaboration Soundbar PART QUANTITY DESCRIPTION Display Soundbar Soundbar Bracket M4x 12 Screw M4 Washer OPS Slot-in PC NOTE: Carefully guide the cables of the Soundbar through the cutout “X” of the soundbar bracket.
InfinityBoard Assembly Instruction Mounting of Collaboration Soundbar NOTE: Depending on your preferences you can mount the soundbar either on top or on bottom of the display. MOUNTING ON BOTTOM MOUNTING ON TOP...
InfinityBoard Assembly Instruction Installing the OPS Slot-in PC NOTE: Make sure to write down the Windows 10 license code which can be found on the rear- side of the OPS slot-in PC. Follow the instruction described in picture 6 to 9: 1.
InfinityBoard Assembly Instruction Connecting Cables NOTE: Do not connect or disconnect cables when turning on the monitor’s main power or other external equipment’s power as this may result in a loss of image. NOTE: Do not use an attenuating (built-in resistor) audio cable. Use an audio cable without a built-in resistor.
Huddly camera from USB-C of the camera to USB 3.0 input on the OPS slot-in PC. NOTE: For use with external PC, NEC can provide Huddly certified USB extension cables to connect the Huddly camera to the external PC.
Setup the OPS Slot-in PC Installation of Windows 10 Professional 1. Follow the Windows installation process. 2. To activate Windows, please use the Windows 10 which can be found on the rear side of the OPS slot-in PC. 3. Once you are ready, you will see the following start screen (except of the Office applications). 1.
Setup the OPS Slot-in PC Select the Speakers 1. Open the “Sound” settings in Windows by clicking on the speaker icon in the Windows task bar. 2. Open the “Playpack” tab in the “Sound” settings and select the V754Q or V864Q monitor as “Default Device”.
Setup the OPS Slot-in PC Select a Microphone 1. Open the “Sound” settings in Windows by clicking on the speaker icon in the Windows task bar. 2. Open the “Recording” tab in the “Sound” settings and select “Microphone 2- Phnx MT107a” as “Default Device”.
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Manufacturer’s Recycling and Energy Information WEEE Mark (European Directive 2012/19/EU and amendments) Disposing of your used product: In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.