Casio XJ-UT Series User Manual page 9

Suffocation and Choking Risks
 Do not allow anyone to play with the
plastic bags used for product
packaging.
-
Plastic bags create the risk of
suffocation when placed over the head,
when swallowed, etc.
Particular care is required in areas
where young children are present.
Dropping and impact
-
Continued use of the projector after it
has been damaged by dropping or
other mistreatment creates the risk of
fire and electric shock. Immediately
perform the following steps.
1. Turn off the projector.
2. Unplug the projector.
3. Contact your original dealer or authorized
CASIO service center.
Disposal by burning
-
Never try to dispose of the projector by
burning it. Doing so can cause an
explosion, which creates the risk of fire
and personal injury.
Avoid Looking into the Light
 Do not look directly into the lens, the
intake or exhaust vents while the light
is on.
-
The strong light emitted by the light
source creates the risk of eye damage.
Vent Blockage
 Do not allow blocking of the intake or
exhaust vents.
Be sure to observe the precautions
below.
-
Blocked vents causes internal heat
buildup, which creates the risk of fire
and malfunction.
• XJ-UT Series: Maintain a distance of at least 6
cm (2.4 inches) between the front of the
projector (from which light is being emitted)
and the projection surface (screen). Maintain a
distance of at least 30 cm (11.8 inches)
between surfaces and the other sides of the
projector.
• XJ-F Series/XJ-S Series: Allow at least 30 cm
(11.8 inches) between the projector and walls.
• Do not insert the product into a space where
air circulation is poor, and do not cover it with
a blanket, etc.
• Do not use the product while it is on a carpet,
blanket, towel, or other soft material, or on a
seat with soft covering. Use the product on a
hard, flat surface.
Keep the Cabinet Closed
 Do not try to open the projector
cabinet.
'
Doing so creates the risk of electric
shock.
Intake and Exhaust Vents
 Do not touch the intake and exhaust
vents during projection, and do not
place any plastic or other objects or
material close to intake/exhaust vents.
Also, do not place the product on top
of such materials.
-
Doing so creates the risk of burn injury,
and deformation and discoloration of
the object or material.
9