Connecting To A Video Device - Casio XJ-UT Series User Manual

Analog RGB Connection
With this type of connection, the RGB cable inputs only the image signal of the computer. If you also
want to output audio from the computer, you will need to connect an audio cable.
Projector Terminal

COMPUTER IN 1*
or

COMPUTER IN 2

AUDIO IN 1* 3
or

AUDIO IN 2
*2 An XJ-F Series model, XJ-S400U, or XJ-S400W has a COMPUTER IN terminal only.
*3 An XJ-F Series model, XJ-S400U, or XJ-S400W has an AUDIO IN terminal only.
Note
 An XJ-UT Series model, XJ-S400UN, or XJ-S400WN has a
lets you directly output the signal being input to the

COMPUTER IN 2 terminal to an external display. For details, see "Using the MONITOR OUT
Terminal (XJ-UT Series, XJ-S400UN, XJ-S400WN)" (page 78).
 The relationship between the image output terminal and audio output terminal can be
changed as required. Note that the combinations shown in the table are initial default settings.
For details, see "Relationship Between Image Input and Audio Input" (page 45).

Connecting to a Video Device

With this type of connection, connect to the HDMI, component video, or composite video terminal of
the video device.
XJ-UT Series
HDMI Connection
With this type of connection, the video signal and audio signal from the video device are input
simultaneously using a single cable.
Projector Terminal

HDMI 2
or

1
HDMI 1*
*1 An XJ-UT312WN model has an HDMI terminal only.
RGB cable (D-Sub 15-pin cable)
2
15-pin Mini D-Sub
Stereo mini jack
HDMI Type A
Connection Cable
Audio cable

COMPUTER IN 1 terminal or
XJ-F Series
Connection Cable
HDMI cable
32
Computer Terminal
Analog RGB Out (VGA)
terminal
Headphones jack or
other audio output jack.

MONITOR OUT terminal that
XJ-S Series
Video Device Terminal
HDMI Out terminal