Outputting Audio From The Projector To Another Device - Casio XJ-UT Series User Manual

Outputting Audio from the Projector to Another Device

You can output audio to an amp speaker or another device instead of using the projector's built-in
speaker.
AUDIO OUT terminal
XJ-UT Series
Under initial projector default settings, audio is output from the projector's built-in speaker. To output
audio using another device, connect as shown below and then change the Setup Menu "Option
Settings 2 3 Audio Out" setting to "Line".
Projector Terminal
AUDIO OUT
Note
 You can also configure settings so that audio input to the projector continues to be output
from the AUDIO OUT terminal even while the projector is in standby (projector turned off, but
being supplied with power) (An XJ-UT Series model, XJ-S400UN, or XJ-S400WN only). See
"Option Settings 2 3 Standby RGB/Audio" (page 65).
AUDIO OUT terminal
XJ-F Series
Connection Cable
Audio cable
Stereo mini jack
34
AUDIO OUT terminal
XJ-S Series
Other Device Terminal
Audio In terminal