Casio XJ-UT Series User Manual page 64

Use this menu item:
Option Settings 1 3
Light Control 3
Light Sensor
Option Settings 1 3
Light Control 3
Light Control
Option Settings 1 3
Auto Power Off
Option Settings 1 3
Password
Option Settings 1 3
Direct Power On
Option Settings 1 3
Projector ID
Option Settings 1 3
Language
Option Settings 1 3
Restore Menu Defaults
Option Settings 2 3
Audio Out
Option Settings 2 3
Audio Input
Option Settings 2 3
High Altitude
To do this:
Enable or disable the light sensor.
On: Enables automatic adjustment of light output in accordance with surrounding
light.
Off*: Disables automatic adjustment of light output.
Enable or disable projector light output (light source brightness).
On*: Enables light output adjustment.
Off: Disables light output adjustment and "Light Sensor" (above). This setting must
be selected when you want the light source to output at maximum brightness.
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
Configure password settings.
For details, see "Using a Password" (page 67).
Enable (On) and disable (Off*) projector auto power on as soon as the projector's AC
power cord is plugged into a power outlet.
Configure projector ID settings.
For details, see "Configuring Remote Control ID and Projector ID Settings" (page 56).
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Lithuanian, Vietnamese, Thai, Malay,
Indonesian, Arabic, Chinese (Simplified), Chinese (Traditional), Korean, Japanese
Important!
 Network Model Users
When using certain Network model functions, some menus and messages
may be displayed in English, regardless of the language selected here.
Return all of the items in the "Option Settings 1" main menu to their initial defaults for
the currently projecting image source.
Specify whether audio input from the input sources should be output to the
projector's speaker (Speaker*) or output to an external destination from the
projector's AUDIO OUT terminal (Line).
Change the audio input.
For details, see "Changing the Audio Input" (page 46).
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
 Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
64