Canon PC1057 User Manual page 39

Information Displayed on the LCD Monitor/
Viewfinder
The LCD monitor displays information in Shooting or Playback
mode, such as the camera settings, remaining image capacity and
shooting date/time.
Shooting Mode
The information appears for approximately 6 seconds when you
operate the camera (such as making a change in shooting settings)
even if the LCD monitor/viewfinder is set to No Information.
(Sometimes no information appears depending on the camera
setting at that time.)
A slow shutter speed has likely been selected because of
insufficient lighting if the camera shake icon
metering preparations are complete. Set the flash to
(Auto), or affix the camera to a tripod to shoot.
After you take a photo by fully pressing the shutter button, the
image displays on the LCD monitor for approximately two
seconds (or the review duration you set from 2 to 10 seconds). If
you press the SET button while the image is displayed, it will
continue to display (p. 54).
You can check the brightness of the image during the image
review after shooting using the histogram (p. 39), a graph which
allows you to judge the brightness of the recorded image and
other information appearing with the image. You can adjust the
exposure according to the results, then shoot again if necessary.
(If no histogram appears, press the INFO. button.)
appears after
(On) or
35