Replacing The Date Battery - Canon PC1057 User Manual

Replacing the Date Battery

If the Set Date/Time menu appears when you turn on the camera
power, the date battery charge is low and the date and time settings
have been lost. Please replace the battery with a generic CR2016
lithium coin battery with the following procedures.
Please note that the first date battery may appear to expire
relatively quickly after you purchase the camera. This is
because it is installed in the camera at the point of
manufacture, not when you make the purchase.
Be particularly careful to keep the date batteries out of the reach
of children. Seek medical assistance immediately if a child
swallows a battery since corrosive battery fluids could damage
the stomach or intestinal wall.
2
Battery holder
1
Turn off the power and open the CF card/battery
cover (p. 21).
2
Remove the battery pack, then pull out the battery
holder by hooking your fingertip under the bottom of
the battery holder edge.
3
Push up the edge of the date battery with your
fingertip, then pull it in the direction of the arrow.
4
Place a new date battery into the date battery holder
with the negative terminal (–) facing upward.
184
3
4
Negative
Terminal (–)