Canon PC1057 User Manual page 26

Installing the Battery Pack/CF card (continued)
3
Insert the CF card.
The label side of the CF card should face the battery compartment.
Push the card in until the CF card eject button fully extends. To
remove the CF card, push the CF card eject button and pull the
card out.
4
Slide the CF card/battery cover closed.
When the indicator blinks, the camera is writing, reading, erasing
or transmitting an image to or from the card. Do not perform the
following, or image data may be lost or corrupted:
• Do not shake the camera.
• Do not turn off the power or open the CF card/battery cover.
You are recommended to use CF cards that have been
formatted in your camera (p. 139). The card supplied with the
camera may be used without further formatting.
Remove the battery pack when the camera is not in use.
See CF Cards and Estimated Capacities (Recordable Images)
(p. 191).
See Battery Performance (p. 190).
Battery Status Symbols
The following icons indicate the battery status on the display panel.
These icons will not appear while the camera is powered with a
compact power adapter.
: Sufficient battery charge
: Low battery
: Replace or recharge battery
22