Advertisement
6.6 PnP/PCI Configurations
Selecting "PnP/PCI Configurations" on the main program screen display this menu :
This option that configures how PnP and PCI expansion slots operate on the mother-
board use system IRQs & DMAs. You must setup the IRQ and DMA assignment cor-
rectly through the PnP/PCI Configuration setup Utility, otherwise the motherboard will
not work properly.
6.6.1 PnP OS Installed
If you have installed a PnP operation system such as Windows 95 or 98, you can
set this item to Yes. The Device Manager Utility in the operation system to make
changes to the configuration of expansion cards.
The available options for PnP OS Installed are : [No] [Yes].
6.6.2 Reset Configuration Data
If you enabled this item and restart the system, any PnP configuration data stored
in the BIOS setup is cleared from memory. New updated data is created.
The available options for Reset Configuration Data are : [Disabled] [Enabled].
6.6.3 Resources Controlled By
IRQ Resources
Memory Resources
You should leave this item at the default [Auto (ESCD)]. Under this setting, the
system dynamically allocates resources to PnP devices as they are required.
The available options for Resources Controlled By are : [Auto (ESCD)] [Manual].
The available options for IRQ/Memory Resources are : [Press Enter].
After you have made you selection(s) in the PnP/PCI Configuration setup,
press the <Esc> key to go back to the main program screen.
48
M81E / M81DC2 / M812-FX Series User's Manual
Advertisement
