Advertisement
6.2.3 CPU L2 Cache ECC Checking
When this item is enabled, it allows the system to carry out cache memory error
checking if the cache memory chips support ECC (Error Checking and Correction).
The available options for CPU L2 Cache ECC Checking are : [Enabled] [Disabled].
6.2.4 Processor Number Feature
The Pentium III processors are installed with a unique processor identification
number. If you Disabled this item, the number will be suppressed so that it cannot
be read by other systems on the network.
The available options for Processor Number Feature are : [Disabled] [Enabled].
Note : You can ignore this item while you unused Pentium III processor on the
system.
6.2.5 Quick Power On Self Test
This will skip some diagnostic checks during the Power On Self Test (POST) to
speed up the booting process.
The available options for Quick Power On Self Test are : [Enabled] [Disabled].
6.2.6 First/Second/Third Boot Device
These items to setting the priority and sequence the devices that your system will
search for an operating device during bootup.
The available options for First/Second/Third Boot Device are : [HDD-0] [SCSI]
[CDROM] [HDD-1] [HDD-2] [HDD-3] [LAN] [Disabled] [LS/ZIP].
6.2.7 Boot Other Device
If you enable this item, the system will search all other possible locations for an
operating device it fails to find one in the devices specified under First, Second and
Third Boot Devices.
The available options for Boot Other Device are : [Enabled] [Disabled].
6.2.8 Boot Up NumLock Status
This item defines if the keyboard <NumLock> key is active when your system is
bootup.
The available options for Boot Up NumLock Status are : [On] [Off].
6.2.9 Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msce)
6. BIOS Configuration
M81E / M81DC2 / M812-FX Series User's Manual
35
Advertisement
