Advertisement
l
Note : If you has a Mini PCI modem card installed in the motherboard, you
must be plug the cable from the chassis-mounted phone port into J14
connector on the motherboard.
RJ-45 Port "USB1 & LAN"
l l l l l
l
l
16
M81E / M81DC2 / M812-FX Series User's Manual
Follow the step mentioned below to install the phone cable :
On the motherboard, locate the J14 connector.
l
Then connect the cable from chassis-mounted phone port to the J14
l
connector.
It is a 8-Pin RJ-45 port for you to connect to either Ethernet 10Base-T or
100Base-TX network. The motherboard provides an RJ-45 port to connect
Twisted Pair Ethernet(TPE) cable to Hub, orient the connector so the key is
aligned with the port, then push the connector into port until you hear a click
voice.
The RJ-45 port has two LED indicators which indicate the presence of station
Link and Activity status for installation verification and diagnostic purpose.
Advertisement
