Advertisement
The POWER ON Function item allows you to power on the system by pressing hot
keys or typing a password. Refer to explain in the below.
[Password] : Disable the function of power button and let the system can only
l
be powered on through the preset keys (like a password).
[BUTTON ONLY] : Disable Wake on Keyboard an Mouse function. You can
l
boot up your system by power button only.
[Keyboard 98] : You can boot up the system by wake up button on keyboard
l
98.
[Any KEY] : This function allows you power on the system by clicking any key.
l
[Mouse Left] : This function allows you power on the system by double click on
l
mouse's left button.
[Mouse Right] : This function allows you power on the system by double click
l
on mouse's right button.
[Hot KEY] : This function allows you power on the system by pressing function
l
key <Ctrl> + <F1> through <Ctrl> + <F12> on keyboard.
The available options for POWER ON Function are : [BUTTON ONLY] [Keyboard
98] [Password] [Hot KEY] [Mouse Left] [Mouse Right] [Any KEY].
The available options for KB Power ON Password are : [Enter].
The available options for Hot Key Power ON are : [Ctrl-F1]~[Ctrl-F12].
6.4.6 Onboard FDC Controller
This item to turn on or turn off the floppy disk controller that is built into the
motherboard.
The available options for Onboard FDC Controller are : [Enabled] [Disabled].
6.4.7 Onboard Serial Port 1
Onboard Serial Port 2
These options are used to assign an I/O address and Interrupt Request Line (IRQ)
for two onboard serial ports.
The available options for Onboard Serial Port 1/2 are : [3F8/IRQ4] [2F8/IRQ3]
[3E8/IRQ4] [2E8/IRQ3] [Auto] [Disabled].
6.4.8 UART2 Mode Select
RxD, TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
6. BIOS Configuration
M81E / M81DC2 / M812-FX Series User's Manual
41
Advertisement
